ASSRA Forum › General › Gunsmithing Single Shot Rifles › Winchester HW/LW Screw Threads
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Winchester HW/LW Screw Threads (Read 2482 times)
ClaMar
Full Member
***
Offline



Posts: 141
Location: Texas
Joined: Jul 23rd, 2013
Winchester HW/LW Screw Threads
Aug 27th, 2013 at 10:47am
Print Post  
Does anyone have a list of all the screw sizes for the HW/LW actions?

Clarence
  
Back to top
 
IP Logged
 
MAD MIKE
Oldtimer
*****
Offline



Posts: 655
Location: So Cal
Joined: Oct 31st, 2006
Re: Winchester HW/LW Screw Threads
Reply #1 - Aug 28th, 2013 at 12:31am
Print Post  
   John Campbell !! in his books, Winchester Single Shot, I believe they are on a drawing in volume II, but you should have both volumes.             ...MAD MIKE...
  
Back to top
 
IP Logged
 
ClaMar
Full Member
***
Offline



Posts: 141
Location: Texas
Joined: Jul 23rd, 2013
Re: Winchester HW/LW Screw Threads
Reply #2 - Aug 28th, 2013 at 1:47pm
Print Post  
Mike,

I don't have Campbell's books, only recently having become interested in the HW/LW rifles.

Could you please scan that page and post it, or send it in a pm?

Clarence
  
Back to top
 
IP Logged
 
MAD MIKE
Oldtimer
*****
Offline



Posts: 655
Location: So Cal
Joined: Oct 31st, 2006
Re: Winchester HW/LW Screw Threads
Reply #3 - Sep 4th, 2013 at 8:47pm
Print Post  
Clarence, this is the easy way.........tang screw 12-28,2 screws for attaching frame & lower tang 10-36, mainspring screw, front tang sight screw also 10-36, firing pin retaining screw & lever retaining pin screw 6-48, if you have a SST the screw is a 4-56, all the rest are wood screws of an appropriate size or pins. Hope this is clear enough & helps.       ...MIKE...
  
Back to top
 
IP Logged
 
Quarter_Bore
Oldtimer
*****
Offline



Posts: 817
Location:   
Joined: Dec 16th, 2005
Re: Winchester HW/LW Screw Threads
Reply #4 - Sep 4th, 2013 at 9:07pm
Print Post  
Thanks. That seems like everything except the forearm screw and ejector spring screw on the front of some .22 actions.
  
Back to top
 
IP Logged
 
ClaMar
Full Member
***
Offline



Posts: 141
Location: Texas
Joined: Jul 23rd, 2013
Re: Winchester HW/LW Screw Threads
Reply #5 - Sep 6th, 2013 at 10:54pm
Print Post  
Mike,

Thanks a lot!

Clarence
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8970 seconds.