ASSRA Forum - AYDT Shcuetzen questions

ASSRA Forum › General › Collecting Single Shot Rifles › AYDT Shcuetzen questions

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1 [2]

Very Hot Topic (More than 25 Replies)

AYDT Shcuetzen questions (Read 13868 times)

John Boy Ex Member	Re: AYDT Shcuetzen questions Reply #15 - Feb 12^th, 2013 at 7:53pm	Print Post
	Borderman wrote on Feb 12^th, 2013 at 1:09pm: I have passed on bidding on rifles like this one with no rear sight. I have no idea what sight would fit in the square socket. Any enlightenment would be much appreciated. Call Bill Loos for original Schuetzen diopters and front sights: 295 Lake Breeze Park Rochester, NY 14622-1948 (585) 544-1027 This one that I picked out that Bill had and he fitted to the rifle ... (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links)


	IP Logged

Water Bug Full Member Offline Posts: 158 Location: north country NYS Joined: Oct 11^th, 2012	Re: AYDT Shcuetzen questions Reply #16 - Feb 13^th, 2013 at 8:05am	Print Post
	John Boy, That is a great Diopter sight. I know Bill Loos. Have bought from him before. When I have the rifle, I surely will be contacting him. I am also thinking it would be a fun and challenging project to make such a sight. I have the tools, and think maybe I could do it. Has anyone out there made one like the pictures? WB


	IP Logged

John Boy Ex Member	Re: AYDT Shcuetzen questions Reply #17 - Feb 13^th, 2013 at 9:58am	Print Post
	Water Bug, might want to read this "how to fit a diopter to your Schuetzen Rifle" ... (You need to *Login* or *Register* to view media files and links)


	IP Logged

bisaacson Full Member Offline Posts: 170 Location: Kailua Joined: Sep 1^st, 2009	Re: AYDT Shcuetzen questions Reply #18 - Feb 16^th, 2013 at 8:25pm	Print Post
	My Aydt has turned out to be one of my favorite guns. It just happens to fit me, and if you listen to what the gun tells you to do, it should shoot very well. Stop ring moulds are available and once the cases are formed, no work at all to reload - reprime, dump in powder, put the bullet in, and try to keep that little post near your favorite aiming point while just touching the set trigger - lots of fun. If it doesn't fit you, you'll struggle, as some of my friends have found out. Really neat set-ups, though, in any case - wonderful metal and woodwork.


	IP Logged

John Boy Ex Member	Re: AYDT Shcuetzen questions Reply #19 - Feb 17^th, 2013 at 10:54am	Print Post
	Water Bug - have you found any source for bullets and brass for the 7.6X46R caliber? It could be the caliber is obsolete. I looked in Cartridge Conversions and it is not listed, plus an Internet search for the caliber. Again, no hits A 30 caliber bullet could work depending on the groove diameter. As for the brass, only a chamber cast will provide details. Then reforming will be becessary


	IP Logged

Fred Boulton Oldtimer Offline Posts: 801 Joined: Jan 6^th, 2007	Re: AYDT Shcuetzen questions Reply #20 - Feb 17^th, 2013 at 11:58am	Print Post
	7.6 is the bore before rifling. The calibre is better known as 8.15 x 46R. A mould is available (stop ring) from NEL and brass is easily formed from 30-30. Fred


	IP Logged

John Boy Ex Member	Re: AYDT Shcuetzen questions Reply #21 - Feb 17^th, 2013 at 5:01pm	Print Post
	Thanks Fred - was not aware the 2 calibers were the same. That being the case, Water Bug is good to go. Buffalo Arms has brass but are Out of Stock ... (You need to *Login* or *Register* to view media files and links) and they also have stop ring molds for the 316 and 320 diameter bullets. WB would be best to slug the bore for which mold


	IP Logged

waterman Frequent Elocutionist Offline Posts: 2846 Location: Behind the Redwood Curtain Joined: Jun 9^th, 2004	Re: AYDT Shcuetzen questions Reply #22 - Feb 17^th, 2013 at 9:28pm	Print Post
	My Haenel Aydt will swallow most of a 30-30 case without much reforming. I do not see any particular need to go to a commercially reformed case when shooting an Aydt. Some Aydt shooters have better accuracy if they do not shorten the case to the specified length. Try leaving it long and shorten by trial and error. Once you get the length right, then breech-seat the bullets. You can use a plugged case as a breech-seater in an Aydt. You will be surprised at the jump in accuracy once you get away from stop-ring bullets.


	IP Logged

John Boy Ex Member	Re: AYDT Shcuetzen questions Reply #23 - Feb 18^th, 2013 at 8:57am	Print Post
	On the flip side, 30-30 reformed brass in the Aydt I have which has a tight chamber - had to have the web diameter made smaller in order to chamber The BACO reformed cases slide in and extract with no binding Bottom Line - it's rifele dependent as to which case fits the best


	IP Logged

Water Bug Full Member Offline Posts: 158 Location: north country NYS Joined: Oct 11^th, 2012	Re: AYDT Shcuetzen questions Reply #24 - Feb 21^st, 2013 at 12:34pm	Print Post
	Thanks all for the cartridge advice. I have another 8.15X46R rifle, and have reformed and shortened some 30-30 cases to that cartridge size and shape. The 8.15X46R is quite a bit shorter than the 30-30. I do have two bullet molds and so am now just waiting delivery of the rifle. I will then do a chamber cast to REALLY see what it is. The seller said the bore is bright and in excellent condition. It will be interesting. Will post results when I know something. WB


	IP Logged

Water Bug Full Member Offline Posts: 158 Location: north country NYS Joined: Oct 11^th, 2012	Re: AYDT Shcuetzen questions Reply #25 - Feb 21^st, 2013 at 12:37pm	Print Post
	John Boy, Just to get a Ball Park idea of costs: How much was that Diopter rear sight?


	IP Logged

Page Index Toggle

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.1713 seconds.