ASSRA Forum - AYDT Shcuetzen questions

ASSRA Forum › General › Collecting Single Shot Rifles › AYDT Shcuetzen questions

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

Very Hot Topic (More than 25 Replies)

AYDT Shcuetzen questions (Read 13867 times)

Water Bug Full Member Offline Posts: 158 Location: north country NYS Joined: Oct 11^th, 2012	AYDT Shcuetzen questions Feb 11^th, 2013 at 1:17pm	Print Post
	I just bought the Schuetzen rifle in the picture. Several questions: Please point me to any threads that have other pictures of similar rifles. Note under barrel markings, there are two sets of proofs and barrel diameters. Does this mean the barrel was bored out and re proofed ? What do the two levers on the side of the action do? help appreciated WB


	IP Logged

feuerbixler Oldtimer Offline Posts: 791 Location: Munich / Bavaria Joined: Apr 23^rd, 2010	Re: AYDT Shcuetzen questions Reply #1 - Feb 11^th, 2013 at 1:48pm	Print Post
	That's a typical "AYDT I" feuerstutzen. They do have the mechanical extractor levers outside the action. Biggi.

	Questions in old German target rifles??? Hhhmm, maybe I can help... ...meanwhile more than 500 quality posts from Bavaria!
	WWW IP Logged

Water Bug Full Member Offline Posts: 158 Location: north country NYS Joined: Oct 11^th, 2012	Re: AYDT Shcuetzen questions Reply #2 - Feb 11^th, 2013 at 4:03pm	Print Post
	Biggi, Thank you. Do you know anything about the maker? WB


	IP Logged

feuerbixler Oldtimer Offline Posts: 791 Location: Munich / Bavaria Joined: Apr 23^rd, 2010	Re: AYDT Schuetzen questions Reply #3 - Feb 11^th, 2013 at 5:37pm	Print Post
	Carl Wilhelm Aydt was one of the most famous makers in the old days. You should read the books of Loos/Rowe/etc. There you can learn everything about the old German manufacturers and the actions they created... ...and you can visit my feuerbixler-homepage to see the Aydt I / Aydt II / Aydt III feuerstutzens and also .22 Aydt action and the Aydt target pistol. Biggi.

	Questions in old German target rifles??? Hhhmm, maybe I can help... ...meanwhile more than 500 quality posts from Bavaria!
	WWW IP Logged

Walter Matera Ex Member	Re: AYDT Shcuetzen questions Reply #4 - Feb 11^th, 2013 at 5:50pm	Print Post
	Damn! Yanno, I'd like one of those.


	IP Logged

feuerbixler Oldtimer Offline Posts: 791 Location: Munich / Bavaria Joined: Apr 23^rd, 2010	Re: AYDT Schuetzen questions Reply #5 - Feb 12^th, 2013 at 3:52am	Print Post
	Water Bug wrote on Feb 11^th, 2013 at 1:17pm: Note under barrel markings, there are two sets of proofs and barrel diameters. Does this mean the barrel was bored out and re proofed ? WB The proofmarks: First proof was in July 1904 and it was written down with the old kind of proof indication for the 8.15 caliber "172.28" and journal-number 626 of the proofhouse. These markings were "deleted" after the rifle got a new barrel. A new barrel was proofed on this rifle with the new caliber proof indication "7,6 mm/46" in July 1930, made by the company of "Udo Anschütz in Zella-Mehlis". Biggi.

	Questions in old German target rifles??? Hhhmm, maybe I can help... ...meanwhile more than 500 quality posts from Bavaria!
	WWW IP Logged

gewehrfreund Senior Forum Member Offline Posts: 437 Location: Cortland Joined: Jan 24^th, 2005	Re: AYDT Shcuetzen questions Reply #6 - Feb 12^th, 2013 at 7:57am	Print Post
	Water Bug wrote on Feb 11^th, 2013 at 4:03pm: Biggi, Thank you. Do you know anything about the maker? WB The original maker was in Bonn, the former German capital, and his name was Anton, or Alfred, or Albert, or Adelbert or. . .you get the idea (probably not an Alois, as that's a southern name). Middle name was August and last name Ahl. I'm sure Biggi has a book with him listed as a rifle maker in that era.


	IP Logged

gunlaker Frequent Elocutionist Offline Posts: 2331 Location: lower mainland, B.C. Joined: Dec 13^th, 2010	Re: AYDT Schuetzen questions Reply #7 - Feb 12^th, 2013 at 11:32am	Print Post
	feuerbixler wrote on Feb 11^th, 2013 at 5:37pm: Carl Wilhelm Aydt was one of the most famous makers in the old days. You should read the books of Loos/Rowe/etc. There you can learn everything about the old German manufacturers and the actions they created... ...and you can visit my feuerbixler-homepage to see the Aydt I / Aydt II / Aydt III feuerstutzens and also .22 Aydt action and the Aydt target pistol. Biggi. I did not know you had a web site. I've been thinking it would be nice to find a German single shot rifle as all of my relatives are from Germany so it would be fitting. Your site looks like a good place to start learning. I will have to brush up on my German though. We spoke it at home when I was a child but this was 40 years ago and I never learned to read the language. Chris.


	IP Logged

feuerbixler Oldtimer Offline Posts: 791 Location: Munich / Bavaria Joined: Apr 23^rd, 2010	Re: AYDT Shcuetzen questions Reply #8 - Feb 12^th, 2013 at 12:50pm	Print Post
	Hi Chris. Yessss, I have a famous homepage... If you use the google translation tool to read my homepage, don't wonder about some ridiculous sentences: Google is not able to translate the technical terms of shooting and also not the Bavarian dialect, which is used for some expressions. If Google translates "APHID" for the Bavarian word "BLATTL", it means "DEAD CENTER" or "BULLs EYE". And the Google translation "FIRE NOZZLE" means "FEUERSTUTZEN", the old German target rifle. Have fun reading my homepage.... Biggi.

	Questions in old German target rifles??? Hhhmm, maybe I can help... ...meanwhile more than 500 quality posts from Bavaria!
	WWW IP Logged

Borderman Participating Member Offline ASSRA # 10859 Posts: 29 Location: Southern Indiana Joined: Nov 16^th, 2011	Re: AYDT Shcuetzen questions Reply #9 - Feb 12^th, 2013 at 1:09pm	Print Post
	I have passed on bidding on rifles like this one with no rear sight. I have no idea what sight would fit in the square socket. Any enlightenment would be much appreciated.

	Dick
	IP Logged

feuerbixler Oldtimer Offline Posts: 791 Location: Munich / Bavaria Joined: Apr 23^rd, 2010	Re: AYDT Shcuetzen questions Reply #10 - Feb 12^th, 2013 at 2:27pm	Print Post
	Borderman wrote on Feb 12^th, 2013 at 1:09pm: I have passed on bidding on rifles like this one with no rear sight. I have no idea what sight would fit in the square socket. Any enlightenment would be much appreciated. You need a German diopter. But there are a lot of different square sockets, also round-double-sockets, oval sockets and triangular sockets. And the sockets have different diameters. Depends on the maker and the brand... ...but there are often diopters for sale on ebay or other auction houses. One has to reckon with 200-400 $ for a good working and fitting diopter. Biggi.

	Questions in old German target rifles??? Hhhmm, maybe I can help... ...meanwhile more than 500 quality posts from Bavaria!
	WWW IP Logged

feuerbixler Oldtimer Offline Posts: 791 Location: Munich / Bavaria Joined: Apr 23^rd, 2010	Re: AYDT Shcuetzen questions Reply #11 - Feb 12^th, 2013 at 3:34pm	Print Post
	gewehrfreund wrote on Feb 12^th, 2013 at 7:57am: . Water Bug wrote on Feb 11^th, 2013 at 4:03pm: Biggi, Thank you. Do you know anything about the maker? WB The original maker was in Bonn, the former German capital, and his name was Anton, or Alfred, or Albert, or Adelbert or. . .you get the idea (probably not an Alois, as that's a southern name). Middle name was August and last name Ahl. I'm sure Biggi has a book with him listed as a rifle maker in that era. . The only information, which I have of the gunsmith "August Ahl": he was selling target rifles and hunting rifles and his shop was mentioned between 1891 and 1910 in Bonn at the Rhine river. Biggi.

	Questions in old German target rifles??? Hhhmm, maybe I can help... ...meanwhile more than 500 quality posts from Bavaria!
	WWW IP Logged

Walter Matera Ex Member	Re: AYDT Shcuetzen questions Reply #12 - Feb 12^th, 2013 at 5:44pm	Print Post
	Oh now, that's all I need. Another website to obsess over. Biggi, I was stationed in Frankfurt AM back in the very early 70's and became a Germanophile (it was the beer and the blondes!). Those old German target rifles are the one thing I would become a collector of. I'm even considering taking a course in woodcarving so I can try and make my own.


	IP Logged

Water Bug Full Member Offline Posts: 158 Location: north country NYS Joined: Oct 11^th, 2012	Re: AYDT Shcuetzen questions Reply #13 - Feb 12^th, 2013 at 5:48pm	Print Post
	THANK YOU Biggi , and all. LOTS of great useful information. AM now awaiting rifle delivery. It will need some TLC to improve the rust and pitting near the breech. WB


	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11523 Location: Why, out West of course Joined: May 29^th, 2006	Re: AYDT Shcuetzen questions Reply #14 - Feb 12^th, 2013 at 6:26pm	Print Post
	Water Bug wrote on Feb 12^th, 2013 at 5:48pm: THANK YOU Biggi , and all. LOTS of great useful information. AM now awaiting rifle delivery. It will need some TLC to improve the rust and pitting near the breech. WB Rust? Pitting? Character. I have some with pipe wrench teeth marks on the barrels. Lot's of character! Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.0736 seconds.