ASSRA Forum › General › Collecting Single Shot Rifles › Stevens 44 barrel markings
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Stevens 44 barrel markings (Read 5126 times)
graduated peep
Ex Member


Stevens 44 barrel markings
Feb 11th, 2013 at 7:57am
Print Post  
Here are some markings on the underside of a Stevens 44 ; there are no caliber markings on the exposed flats of the barrel.
Any ideas what these may mean ???
The barrel measures out to be a 28-30 ; but I don't have the opportunity to cast the chamber.
  
Back to top
 
IP Logged
 
gewehrfreund
Senior Forum Member
****
Offline



Posts: 437
Location: Cortland
Joined: Jan 24th, 2005
Re: Stevens 44 barrel markings
Reply #1 - Feb 11th, 2013 at 8:51am
Print Post  
A rebored 25-20SS perhaps? (or a worn 25-20)
  
Back to top
 
IP Logged
 
Quarter_Bore
Oldtimer
*****
Offline



Posts: 817
Location:   
Joined: Dec 16th, 2005
Re: Stevens 44 barrel markings
Reply #2 - Feb 11th, 2013 at 10:54am
Print Post  
Probably a rebored 25-20. The 110 stands for the model number. Very early higher grade Model 44's were numbered 108,109, &110 depending on grade Smiley.
  
Back to top
 
IP Logged
 
slumlord44
Frequent Elocutionist
*****
Offline



Posts: 2850
Location: Lebanon, Illinois 62254
Joined: Dec 21st, 2007
Re: Stevens 44 barrel markings
Reply #3 - Feb 11th, 2013 at 9:49pm
Print Post  
I have never seen a 44 that was not stamped with the caliber on the top left flat of the barrel. But then I have definately never seen it all yet. I am thinking re bored also.
  
Back to top
 
IP Logged
 
graduated peep
Ex Member


Re: Stevens 44 barrel markings
Reply #4 - Feb 12th, 2013 at 7:47am
Print Post  
Hi guys,
Thanks for the input.
As far as I can tell, the only visible markings on the barrel are the typical Stevens A&T patent dates of 1894.
Unfortunately, I do not own this rifle nor is it within personal reach. If it was, I'd do a chamber cast to be certain what the current chambering is.

Sorry for being dense, but does the 25-20 stamping refer to what it was before re-boring, or what it was re-bored to ???
If it was re-bored to 25-20 at some point, and the bore measures at approx .285", then it must have been re-bored yet again  Huh
  
Back to top
 
IP Logged
 
frnkeore
Frequent Elocutionist
*****
Offline



Posts: 7324
Location: Central Point, OR 97502
Joined: Jun 16th, 2010
Re: Stevens 44 barrel markings
Reply #5 - Feb 12th, 2013 at 12:04pm
Print Post  
A thought comes to mind........ did Stevens sell barrels finished on the outside to gunsmiths and other manufactors?

They did a lot of custom stuff, could that be one of them?

Frank
  
ASSRA Member #696, ISSA Member #339
Back to top
YIMAIM  
IP Logged
 
John in PA
Oldtimer
*****
Offline



Posts: 580
Location: Hollidaysburg, PA
Joined: Nov 3rd, 2009
Re: Stevens 44 barrel markings
Reply #6 - Feb 15th, 2013 at 7:10am
Print Post  
Hey, Peep:  Check your PM.
  
John Wells
Hollidaysburg, PA
Peabody and Peabody-Martini's Wanted!
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4076
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: Stevens 44 barrel markings
Reply #7 - Feb 15th, 2013 at 11:11pm
Print Post  
My Stevens 44 in .25-20 SS is marked on the barrel:

  
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4076
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: Stevens 44 barrel markings
Reply #8 - Feb 15th, 2013 at 11:13pm
Print Post  
My Stevens 44 has the following markings on the front of the receiver under the forearm:

What does the "0" indicate?

There is also a number 2 stamped on the barrel under the forearm with no other markings except the serial number. What does the 2 designate?
  
Back to top
 
IP Logged
 
frnkeore
Frequent Elocutionist
*****
Offline



Posts: 7324
Location: Central Point, OR 97502
Joined: Jun 16th, 2010
Re: Stevens 44 barrel markings
Reply #9 - Feb 16th, 2013 at 12:39am
Print Post  
Dave,
The #2 is the barrel weight.

The 0 some/most believe it means that the rifle came with no options.

Frank
  
ASSRA Member #696, ISSA Member #339
Back to top
YIMAIM  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.0515 seconds.