ASSRA Forum - Barrel Liner- Benchrest accuracy?

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Barrel Liner- Benchrest accuracy?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1 [2]

Barrel Liner- Benchrest accuracy? (Read 8973 times)

gnoahhh Oldtimer Offline Posts: 979 Location: Gaithersburg, MD Joined: Mar 31^st, 2010	Re: Barrel Liner- Benchrest accuracy? Reply #15 - Oct 11^th, 2025 at 12:10pm	Print Post
	I can't say Cryo will help but I have found that many shooter do better if they think their gun will do better. [/quote] Truer words were never spoken.


	IP Logged

Old+timer Participating Member Offline Posts: 46 Location: Ft.Pierce, FLA Joined: Sep 24^th, 2025	Re: Barrel Liner- Benchrest accuracy? Reply #16 - Oct 12^th, 2025 at 11:02am	Print Post
	Metal does have a memory and several circumstances awaken that memory so that it wants to return to its prior state. I would suggest that both the barrel and the liner made as straight as possible, then "cryo-ed" so that that the new memory it will create will be based on the straightest possible condition of those two components~!


	IP Logged

Old+timer Participating Member Offline Posts: 46 Location: Ft.Pierce, FLA Joined: Sep 24^th, 2025	Re: Barrel Liner- Benchrest accuracy? Reply #17 - Oct 13^th, 2025 at 12:10pm	Print Post
	gnoahhh wrote on Oct 11^th, 2025 at 12:10pm: I can't say Cryo will help but I have found that many shooter do better if they think their gun will do better. Truer words were never spoken. [/quote] Do you agree that a rifle barrel heats up the POI changes? That's because the metal in the barrel's memory is returning to its earlier state. CRYO removes that memory and with no memory the heating will take the barrel nowhere because it has nothing to go back to except to its state post*CRYO.


	IP Logged

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

Page completed in 0.4987 seconds.