ASSRA Forum - need 25 caliber barrel

ASSRA Forum › General › Gunsmithing Single Shot Rifles › need 25 caliber barrel

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

need 25 caliber barrel (Read 2751 times)

jimmy Senior Forum Member Offline Now available in Oklahoma. Posts: 469 Location: Skiatook Joined: May 12^th, 2009	need 25 caliber barrel Dec 6^th, 2010 at 10:06pm	Print Post
	New project. May do a couple of guns if I can find a barrel source. We are looking for #1 taper or smaller 25 caliber barrels for a project. 1 inch to .875 main shank tapering to .75 or so. I know they can be turned but thought someone out there would make a smaller barrel to start with. Going on a small frame single shot and chambering to 25-20ss. Thanks.


	IP Logged

Green_Frog Frequent Elocutionist Offline "It ain't easy being green" ASSRA Life #281 Posts: 4164 Location: Lynchburg, VA Joined: Apr 18^th, 2004	Re: need 25 caliber barrel Reply #1 - Dec 6^th, 2010 at 10:40pm	Print Post
	Green Mountain makes a sweet little octagon barrel about the size you are describing intended for the small caliber lever guns. I have one on a low-wall that's "just as cute as a speckled pup!" Froggie


	IP Logged

whitey hanson Ex Member	Re: need 25 caliber barrel Reply #2 - Dec 6^th, 2010 at 11:20pm	Print Post
	As the Frog said. And they start a 17 cal and go up.


	IP Logged

John Taylor Frequent Elocutionist Offline Posts: 1851 Location: Lewiston, ID Joined: Oct 23^rd, 2006	Re: need 25 caliber barrel Reply #3 - Dec 7^th, 2010 at 10:21am	Print Post
	GM has a 1" X25" barrel in 25-20 for $85. They show the tapered octagon as discontinued in that caliber.

	John Taylor Machinist/gunsmith
	WWW IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.1464 seconds.