ASSRA Forum › General › Gunsmithing Single Shot Rifles › Low Wall main spring and forend lugs
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Low Wall main spring and forend lugs (Read 3284 times)
underwatermike
Ex Member


Low Wall main spring and forend lugs
Aug 30th, 2010 at 9:31pm
Print Post  
Can't seem to get ahold of Ballard Arms, any other source for the main spring and forend lugs?
Thanks in advance,
Mike T.
  
Back to top
 
IP Logged
 
Old-Win
Frequent Elocutionist
*****
Offline



Posts: 1825
Location: Minnesota
Joined: Nov 24th, 2005
Re: Low Wall main spring and forend lugs
Reply #1 - Aug 30th, 2010 at 11:13pm
Print Post  
Try this contact although he isn't showing lugs.  Steve Meacham should have a lug.
(You need to Login or Register to view media files and links)
Bob
  
Back to top
 
IP Logged
 
underwatermike
Ex Member


Re: Low Wall main spring and forend lugs
Reply #2 - Aug 31st, 2010 at 12:33am
Print Post  
Thanks Bob
  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2942
Location: Southern NJ
Joined: Aug 1st, 2010
Re: Low Wall main spring and forend lugs
Reply #3 - Sep 3rd, 2010 at 6:19am
Print Post  
Keith Kilby at the Wyoming Armory will have what you need. I've been shooting the Low Wall .22LR I got from him for about a week and it is very accurate. The single-set trigger is terrific, as is the fit and finish of all his work. Highly recommended. I posted a pic or two of the rifle in the single shot rifle picture thread if you want to see his work.
(You need to Login or Register to view media files and links)
  
Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
Back to top
GTalk  
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4164
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: Low Wall main spring and forend lugs
Reply #4 - Sep 5th, 2010 at 7:41am
Print Post  
Steve Earle was at Etna Green this weekend with his road show of wonderful pieces parts.  I am certain he had the fore end lug, and believe he also had the mainspring mounting block.  If not, he probably can make it for you.  You might call him or check his website in a couple of days when he is back in the shop.

Froggie
  
Back to top
 
IP Logged
 
John Taylor
Frequent Elocutionist
*****
Offline



Posts: 1851
Location: Lewiston, ID
Joined: Oct 23rd, 2006
Re: Low Wall main spring and forend lugs
Reply #5 - Sep 5th, 2010 at 4:56pm
Print Post  
Already posted this someplace ells. Wisner's has the forearm lug for the Model 70 which is almost the same as the 1885 and will work fine. He also has the screw.
  
John Taylor   Machinist/gunsmith
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2901 seconds.