ASSRA Forum - replacenebt trapdoor mainspring

ASSRA Forum › General › Gunsmithing Single Shot Rifles › replacenebt trapdoor mainspring

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

replacenebt trapdoor mainspring (Read 3070 times)

Joe_S Frequent Elocutionist Offline Posts: 1076 Joined: Jun 29^th, 2004	replacenebt trapdoor mainspring Jan 19^th, 2009 at 10:14pm	Print Post
	Can anyone recommend a source for replacement trapdoor mainsprings? I would like to lighten the trigger pull on my rifle as per another thread on this forum, so I would prefer a newly made spring rather than an original. Thanks, JOe S


	IP Logged

Mozark Junior Member Offline Posts: 63 Location: Mon. National Forest Joined: May 1^st, 2008	Re: replacenebt trapdoor mainspring Reply #1 - Jan 20^th, 2009 at 7:28am	Print Post
	Joe, You can get an original here: (You need to *Login* or *Register* to view media files and links) and here's a reproduction: (You need to *Login* or *Register* to view media files and links) MM
	« Last Edit: Jan 20^th, 2009 at 7:48am by Mozark »

	IP Logged

Anvils Ex Member	Re: replacenebt trapdoor mainspring Reply #2 - Jan 20^th, 2009 at 10:32am	Print Post
	Joe. If you want to improve the trigger on a Springfield trapdoor, I suggest you stay with the orginal main spring and buy one of Robert Smith's lock tumblers ( Robert Smith 619 Wood St. Powell WY 82435 $50 delivered ) This will give you quicker lock time and some trigger adjustment. Norm


	IP Logged

Joe_S Frequent Elocutionist Offline Posts: 1076 Joined: Jun 29^th, 2004	Re: replacenebt trapdoor mainspring Reply #3 - Jan 20^th, 2009 at 12:18pm	Print Post
	I would love to use one of those new tumblers, but they are only appropriate for a two noch sear and tumbler, and my rifle has a three notch sear and tumbler, which I like a lot. If they made one with three notches that is the route I would take. Thanks, Joe


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9241 seconds.