Welcome, Guest. Please
Login
or
Register
ASSRA Home
Board Index
Help
Search
Login
Register
ASSRA Forum
›
General
›
General Discussion
› Scope Design
(Moderator Group: Moderator)
‹
Previous Topic
|
Next Topic
›
Pages:
1
2
3
[4]
5
6
...
11
Send Topic
Print
Scope Design (Read 99667 times)
rimfire
Ex Member
Re: Scope Design
Reply #45 -
Mar 22
nd
, 2008 at 9:02am
Print Post
I got my order in - hope that they haven't sold out - they are probably wondering why the run on this item - dead eye should get a commission - the rimfire - cdpersons
IP Logged
dead_eye
Ex Member
Re: Scope Design
Reply #46 -
Mar 22
nd
, 2008 at 5:41pm
Print Post
No. there is nothing in the book that has information on dot reticule. I wonder if you could use a drop of crazy glue to make the dot.
IP Logged
rimfire
Ex Member
Re: Scope Design
Reply #47 -
Mar 22
nd
, 2008 at 6:28pm
Print Post
I beleieve that George Mitchell used T.K. Lee recticles in his scopes when he was still building them - I know its not making your own but as I recall they were not all that expensive - they install their recticles in scopes but I believe that they will also sell just the recticle - doesn't hurt to ask.
(You need to
Login
or
Register
to view media files and links)
you all have a good day now - the rimfire - cdpersons
IP Logged
dead_eye
Ex Member
Re: Scope Design
Reply #48 -
Mar 24
th
, 2008 at 9:14am
Print Post
that is an interesting site. I whish they explained their produce a little better. I mite have to have a scope done some day
IP Logged
singleshot
Senior Forum Member
Offline
I love singleshots!
Posts: 331
Location: Fort Mill, SC
Joined: Apr 17
th
, 2004
Re: Scope Design
Reply #49 -
Mar 24
th
, 2008 at 9:19pm
Print Post
TK Lee was born less than 5 miles from where I sit, in Fort Mill, SC.
Willis Gregory, aka singleshot
IP Logged
dead_eye
Ex Member
you tube cross hair installation
Reply #50 -
Mar 27
th
, 2008 at 12:35pm
Print Post
(You need to
Login
or
Register
to view media files and links)
"
I will be posting some more videos in the next few days
IP Logged
mriisj assra Life
Full Member
Offline
Posts: 148
Location: Copenhagen
Joined: Dec 11
th
, 2007
Re: Scope Design
Reply #51 -
Mar 27
th
, 2008 at 1:24pm
Print Post
Very informative 11 minute video thanks.
Keep up the good work
Michael
Skype/VoIP
IP Logged
RJM
Full Member
Offline
Posts: 212
Location: State of Confusion
Joined: Oct 15
th
, 2006
Re: Scope Design
Reply #52 -
Mar 28
th
, 2008 at 7:49am
Print Post
Dead_eye,
OK, I've jumped into the project. The lenses & brass rod are sitting in front of me. You give the fastenal link for the tubing, but don't mention what length will be needed.
What length of 3/4" tubing should I order?
Great thread,
Thanks,
Ron
IP Logged
dead_eye
Ex Member
Re: Scope Design
Reply #53 -
Mar 28
th
, 2008 at 8:30am
Print Post
Hi RJM
the lenght that i order is 36" so i have a little playing room with the length of the scope. but the frist thing is to figure what gun it is going on and weather the scope will be full length or shorter like the unertl or stevens. once this is done then buy the length of tubing that is needed with a few extra inches to square the ends to the final size. or just buy a few extra feet so another one can be made at a later date.
IP Logged
RJM
Full Member
Offline
Posts: 212
Location: State of Confusion
Joined: Oct 15
th
, 2006
Re: Scope Design
Reply #54 -
Mar 28
th
, 2008 at 7:50pm
Print Post
Dead_eye,
I went back & re-read the part about placing the lenses on the angle & finding the right place for the erector.
So, IF (a mighty big if) I have it right:
The length of the scope is somewhat arbitrary, using the same lenses. A position for the erector lens can be found to focus the scope whatever the distance between the objective & eye piece. Correct??
I have read that the scope on the Lyman Centennial Ruger #1 rifles were made with left over lenses from the old Lyman A5 scopes. The A5 is considerably shorter than the full length centennial, so this would suggest the length can be varied a good bit.
Using the same lenses, does the length of the scope affect the magnification, brightness, or clarity?
Thanks for your patience,
Ron
IP Logged
dead_eye
Ex Member
Re: Scope Design
Reply #55 -
Mar 29
th
, 2008 at 12:32am
Print Post
Hi RJM
you are correct the same lenses can be used for any length of scope. the magnification should be the same no matter what length of scope is made. the clarity will be the same with any length because the cell are layed out the same way no matter if the scope is 17" or 34". the brightness is determined by the reducer that is placed in the scope to control the light that enters the lenses.
there will be a video on you tube tomarrow about laying out the cells.
when it is done up loading i will post.
glad to help
john
IP Logged
jfeldman
ASSRA Board Member
Offline
Posts: 1079
Location: Imperial Beach, Ca
Joined: Nov 5
th
, 2005
Re: Scope Design
Reply #56 -
Mar 29
th
, 2008 at 12:46am
Print Post
I may never make a scope myself, but this is one of the most informative and entertaining threads I've seen on this forum. Thanks Deadeye!!!
Regards, Joe
IP Logged
Redwing
Oldtimer
Offline
Posts: 586
Location: Canton
Joined: Nov 4
th
, 2007
Re: Scope Design
Reply #57 -
Mar 29
th
, 2008 at 10:41am
Print Post
Hey Dead-Eye !!!
As a collector of old sights and scopes, I can tell you that you have now opened up a whole new future for all of those poor old broken scopes in my junk box…
I have added your instructions, pictures and video(s) to my list of special references and will soon be building my own scope for my collection of single shot rifle’s..
Thanks again !!!
Ed…..
IP Logged
dead_eye
Ex Member
Re: Scope Design
Reply #58 -
Mar 29
th
, 2008 at 11:49am
Print Post
here is the link to you tube about how to lay out the cells for the scope.
(You need to
Login
or
Register
to view media files and links)
IP Logged
OKIEPAWPAW
Ex Member
Re: Scope Design
Reply #59 -
Mar 31
st
, 2008 at 5:11pm
Print Post
Dead-Eye
Do you make the light reduction cell 3/4" long.
How far back from the cross-hair cell do you put the light reducton cell.
2" 3" or do you have to play with this?
I've got everything to build a couple of scopes. Turning my cells today.
Thanks
Bob
IP Logged
Pages:
1
2
3
[4]
5
6
...
11
Send Topic
Print
‹
Previous Topic
|
Next Topic
›
Forum Jump »
Board Index
» 10 most recent Posts
» 10 most recent Topics
General
Announcements
General Discussion ««
Single Shot Rifles
Reloading the Single Shot Rifle
Gunsmithing Single Shot Rifles
Collecting Single Shot Rifles
Hunting with Single Shot Rifles
Rifle Photos
ASSRA Match Scores
For Sale/Trade
Support and Feedback
ASSRA.COM Feedback and Suggestions
Forum Help
Membership Support
« Board Index
‹ Board
ASSRA Forum
» Powered by
YaBB 2.6.12
!
YaBB Forum Software
© 2000-2024. All Rights Reserved.
Page completed in 1.2019 seconds.