ASSRA Forum › General › General Discussion › TONG TOOLS
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic TONG TOOLS (Read 3739 times)
rwjshooter
Ex Member


TONG TOOLS
May 29th, 2006 at 4:53pm
Print Post  
HI GUYS & FROGGIE;
mr. Frog; enjoyed your artical on the Lyman -Ideal tool in the Journal as I had bought a box of tools and dies not knowing what I was getting for sure. After getting, I then knew I did'nt know what I had. All is now well --but I have one set of handles that the hole is larger than the regular sized tool the dies just drop in no threading in at all. what do I have?? 
Thanks
Have a Nice Day
Ray
  
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4164
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: TONG TOOLS
Reply #1 - May 30th, 2006 at 12:01am
Print Post  
Hi back atcha Ray.  BTW, I am one of the guys at last check!  Grin

I have read about but have not seen a variant of the tong tool for one of the larger rifle cases that was too fat to go into one of the regular dies.  The 348 caliber is coming to mind, but I'm not sure.  I thought that was threaded to a larger diameter though.  I'll have to get back to you if somebody doesn't beat me to the punch, but if the handles have no threads at all, they have no way to secure the dies, so I doubt this set is original from Lyman unless somebody sent out a serious error in manufacturing and it went undetected.   

FWIW, I have also seen an early (nickel plated) handle with a much smaller than normal hole, this one designed for little dies to load the .25-20 SS.

Based on the handles I have had in hand and seen discussed, anything other than the standard (just under 5/8 X 30 tpi) die configuration is pretty rare.

JMHO&FM (Froggie or Faulty - your choice Memory)
  
Back to top
 
IP Logged
 
rwjshooter
Ex Member


Re: TONG TOOLS
Reply #2 - May 30th, 2006 at 10:09am
Print Post  
Hi Froggie 
Ya I 'd kinda knew you were one of the guys, a little more on these handles --they are like new aluminum? alloy , marked Ideal, hole threaded larger than the 5/8 x30. fine thread, new type handle with the adjustment hook thinggee feature. anyhow thats that .
Still playing with the buggering primers in the flash  hole. I went down to 7.5 grs. unique before the little puckers ( spelled with a P) went flat like they should be .
So nuf fer now 
Have a Nice Day 
Ray
  
Back to top
 
IP Logged
 
rk4570
Ex Member


Re: TONG TOOLS
Reply #3 - May 30th, 2006 at 8:32pm
Print Post  
There was a site called " the 310 outpost" on line but I dont know if its still up. You can do a Google search for " Lyman 310 loading tools ".....
There are several pages of good stuff about them. Cool
  
Back to top
 
IP Logged
 
J.D.Steele
Ex Member


Re: TONG TOOLS
Reply #4 - May 31st, 2006 at 10:01am
Print Post  
The larger handles were for the 348 Win cartridge, and of course they took the larger-size dies as well. I've seen this variant listed for only the 348, but it should also work for the various 50 cals if you could find anyone to make dies for it.

The larger handles are not very useful but they are rare, and you could probably trade them for some other tong tool goodies. They're worth almost twice as much as the regular handles.

I have a fair supply of Lyman 310 stuff, PM me if interested in a trade.
Good luck, Joe
  
Back to top
 
IP Logged
 
rwjshooter
Ex Member


Re: TONG TOOLS
Reply #5 - May 31st, 2006 at 2:41pm
Print Post  
Hi Joe
Thanks for the info 
I would be interested in a trade for something of more value to me I don't have anything for the big hole dies (if that is the proper term)

Ray
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.3173 seconds.