Page Index Toggle Pages: [1]  Send TopicPrint
Hot Topic (More than 10 Replies) 32-40 case failure help. (Read 493 times)
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12678
Location: Why, out West of course
Joined: May 29th, 2006
32-40 case failure help.
Nov 16th, 2026 at 9:16pm
Print Post  
An actual headstamped 32-40 case. What should I do? Solder it? Will it hold? I'd like to save it. They don't grow on trees.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
bpjack
Frequent Elocutionist
*****
Offline



Posts: 4167
Location: East Olympia, WA
Joined: May 18th, 2008
Re: 32-40 case failure help.
Reply #1 - Nov 16th, 2026 at 10:42pm
Print Post  
Machine a sleeve and silver solder it in place.  Then put it in a museum.
  

People who think they know everything are a great annoyance to those of us who do.
Back to top
 
IP Logged
 
craigster
Oldtimer
*****
Offline



Posts: 848
Location: lost coast CA
Joined: Feb 20th, 2011
Re: 32-40 case failure help.
Reply #2 - yesterday at 12:20am
Print Post  
JB Weld and some Scotch tape.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12678
Location: Why, out West of course
Joined: May 29th, 2006
Re: 32-40 case failure help.
Reply #3 - yesterday at 12:27am
Print Post  
The case is 1 of 100 matching cases for the Binger Banger 33-40. It's just a tiny hole. Seems to me a dab of solder would make it useable again. Yes I could replace it with a new case but that would throw everything akilter. The Binger Banger is a finely tuned shooting machine. You wouldn't believe the time I've spent getting everything adjusted just right. I'm still adjusting the powder charge. Call me a fussbucket but every little detail makes a difference. I'm doing the best I can with the Ron Long bullet which is just a bit to long. I could sure use that Hoch .33 mold you have. Jack!
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
frnkeore
Frequent Elocutionist
*****
Offline



Posts: 7794
Location: Central Point, OR 97502
Joined: Jun 16th, 2010
Re: 32-40 case failure help.
Reply #4 - yesterday at 2:49am
Print Post  
Joe, how long is the bullet and what dia are the bands?

I have a PJ that I might trade.
  

ASSRA Member #696, ISSA Member #339
Back to top
YIMAIM  
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12678
Location: Why, out West of course
Joined: May 29th, 2006
Re: 32-40 case failure help.
Reply #5 - yesterday at 3:06am
Print Post  
1.215 long. Baseband is .341 top band is .335. Weight is 238.6. Fits my bore perfectly. With 14.8 gr 4227 the bullets are still tipping. My barrel is 16 twist. What you got?
« Last Edit: yesterday at 8:25am by westerner »  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
J.Francis
Full Member
***
Offline



Posts: 175
Location: Pownal, Vermont
Joined: Nov 20th, 2011
Re: 32-40 case failure help.
Reply #6 - yesterday at 7:26am
Print Post  
I'll admit you've gotten some excellent suggestions on how to repair your rare case , but the most obvious solution has been ignored. What is it? Why, silly putty of course.
  
Back to top
 
IP Logged
 
gnoahhh
Frequent Elocutionist
*****
Offline



Posts: 1196
Location: Gaithersburg, MD
Joined: Mar 31st, 2010
Re: 32-40 case failure help.
Reply #7 - yesterday at 7:44am
Print Post  
All good suggestions for mending the broken case, and coincidentally for mending a broken heart also.

I might add that if soldering or epoxying a patch it would obviously need to be done on the inside surface - which would be tricky. My suggestion would be to take it to a clinic where they have the gear to do arthroscopic surgery and let the robot go in and mend it.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12678
Location: Why, out West of course
Joined: May 29th, 2006
Re: 32-40 case failure help.
Reply #8 - yesterday at 8:23am
Print Post  
J.Francis wrote yesterday at 7:26am:
I'll admit you've gotten some excellent suggestions on how to repair your rare case , but the most obvious solution has been ignored. What is it? Why, silly putty of course.


Silly Putty, I hadn't thought of it. Have not seen nor played with Silly Putty for many many years. What a novel idea. Thank you. 
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12678
Location: Why, out West of course
Joined: May 29th, 2006
Re: 32-40 case failure help.
Reply #9 - yesterday at 8:32am
Print Post  
gnoahhh wrote yesterday at 7:44am:
All good suggestions for mending the broken case, and coincidentally for mending a broken heart also.

I might add that if soldering or epoxying a patch it would obviously need to be done on the inside surface - which would be tricky. My suggestion would be to take it to a clinic where they have the gear to do arthroscopic surgery and let the robot go in and mend it.


Having served two tenures as a slot car mechanic and builder, I can solder just about anything. 
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
JHand
Senior Forum Member
****
Offline



Posts: 307
Joined: Apr 15th, 2024
Re: 32-40 case failure help.
Reply #10 - yesterday at 11:41am
Print Post  
westerner wrote yesterday at 3:06am:
1.215 long. Baseband is .341 top band is .335. Weight is 238.6. Fits my bore perfectly. With 14.8 gr 4227 the bullets are still tipping. My barrel is 16 twist. What you got?


A 238gr in a 16 twist? My 200gr Darr tips in my 16 twist. Maybe a tumbling 238 would be more likely to cut the 25 ring?
  
Back to top
 
IP Logged
 
frnkeore
Frequent Elocutionist
*****
Offline



Posts: 7794
Location: Central Point, OR 97502
Joined: Jun 16th, 2010
Re: 32-40 case failure help.
Reply #11 - yesterday at 12:46pm
Print Post  
westerner wrote yesterday at 3:06am:
1.215 long. Baseband is .341 top band is .335. Weight is 238.6. Fits my bore perfectly. With 14.8 gr 4227 the bullets are still tipping. My barrel is 16 twist. What you got?

This is my PJ but, your .335 band is to small for me.
  

ASSRA Member #696, ISSA Member #339
Back to top
YIMAIM  
IP Logged
 
frnkeore
Frequent Elocutionist
*****
Offline



Posts: 7794
Location: Central Point, OR 97502
Joined: Jun 16th, 2010
Re: 32-40 case failure help.
Reply #12 - yesterday at 2:01pm
Print Post  
This has been my most accurate 33 mold. No maker name but, it came from Jerry Simmons estate, as I remember. It's a little shorter but, my twist is about 15.

The NOE mold, I designed for them as a hunting bullet but, I won a CBA match with it First in 100 yd, four 5 group, second in four, 10 shot group . I would say that overall, it's as accurate as the PJ and is shorter. It could work in your 16 twist.
« Last Edit: yesterday at 2:15pm by frnkeore »  
(You need to Login or Register to view media files and links) ( 32 KB | 0 Downloads )

ASSRA Member #696, ISSA Member #339
Back to top
YIMAIM  
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12678
Location: Why, out West of course
Joined: May 29th, 2006
Re: 32-40 case failure help.
Reply #13 - yesterday at 2:10pm
Print Post  
Here is the bullet I'd like to have. It's .940 long and same band diameters as my Ron Long bullets. Shoots good in the Binger Banger. Weighs 206.
Not likely to be shooting this rifle in BR matches. Best group I've got with it at 200 is about 1 1/4 inches. Plenty good enough for me.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
.22-5-40
Oldtimer
*****
Offline



Posts: 830
Joined: Feb 13th, 2010
Re: 32-40 case failure help.
Reply #14 - yesterday at 6:56pm
Print Post  
Flex seal flex tape!
  
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 4089
Joined: Mar 9th, 2015
Re: 32-40 case failure help.
Reply #15 - Today at 10:11am
Print Post  
chop that sucker below the cannelure and keep using it. if you breech seat, who cares if the hull is a bit short?
and if you set them in the box on your bench on a windy day the air will make differing whistle sounds for musical accompaniment as you shoot. and irritate the guys nearby.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12678
Location: Why, out West of course
Joined: May 29th, 2006
Re: 32-40 case failure help.
Reply #16 - Today at 10:49am
Print Post  
I remember one time at Glasgow, the wind was syphoning powder out of a shooters preloaded cases while he was shooting. I like wads to keep the powder in.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 4089
Joined: Mar 9th, 2015
Re: 32-40 case failure help.
Reply #17 - Today at 11:56am
Print Post  
I use pieces of insulating foam, but take 'em out before loading into the chamber. I first used earplugs when I got them free- now I need to buy those buggers.
  
Back to top
 
IP Logged
 
GT
Frequent Elocutionist
*****
Offline



Posts: 2441
Location: Northeast Wyoming
Joined: Jun 28th, 2015
Re: 32-40 case failure help.
Reply #18 - Today at 12:02pm
Print Post  
Wes,
Hi-Force 44 will fix that case and keep your string together.
I'm converting a few of the 28-30 cases to small primers now.  Some of these cases I made have 200 + loadings on them and the LR primers fall out.  Have one SM rifle I did and it has 12 firings on it so far so I think if I do them all the same they'll last. 
You can fix your case with no issues I bet.
GT
  

"To invent, you need a good imagination and a pile of junk"  T. A. Edison
"The trouble ain't that there is too many fools, but that the lightning ain't distributed right" M.T.
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12678
Location: Why, out West of course
Joined: May 29th, 2006
Re: 32-40 case failure help.
Reply #19 - Today at 12:33pm
Print Post  
I think solder will work fine. I've got some flux around here some place. 

The floral foam wads worked good on Saturday at Butte. Bore stayed sparkly clean using 14.8 gr 4227. Not so with TiteGroup powder. TiteGroup and the floral foam left a hard  coating in the throat. Had to use steel wool to remove it. Not as bad but the same with 1/8 inch cork wads. 
My thinking is the Titegroup being a fast powder did not create enough heat to consume the floral foam.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 
Send TopicPrint