Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) 32-40 case failure help. (Read 496 times)
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 4089
Joined: Mar 9th, 2015
Re: 32-40 case failure help.
Reply #15 - Today at 10:11am
Print Post  
chop that sucker below the cannelure and keep using it. if you breech seat, who cares if the hull is a bit short?
and if you set them in the box on your bench on a windy day the air will make differing whistle sounds for musical accompaniment as you shoot. and irritate the guys nearby.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12678
Location: Why, out West of course
Joined: May 29th, 2006
Re: 32-40 case failure help.
Reply #16 - Today at 10:49am
Print Post  
I remember one time at Glasgow, the wind was syphoning powder out of a shooters preloaded cases while he was shooting. I like wads to keep the powder in.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 4089
Joined: Mar 9th, 2015
Re: 32-40 case failure help.
Reply #17 - Today at 11:56am
Print Post  
I use pieces of insulating foam, but take 'em out before loading into the chamber. I first used earplugs when I got them free- now I need to buy those buggers.
  
Back to top
 
IP Logged
 
GT
Frequent Elocutionist
*****
Offline



Posts: 2441
Location: Northeast Wyoming
Joined: Jun 28th, 2015
Re: 32-40 case failure help.
Reply #18 - Today at 12:02pm
Print Post  
Wes,
Hi-Force 44 will fix that case and keep your string together.
I'm converting a few of the 28-30 cases to small primers now.  Some of these cases I made have 200 + loadings on them and the LR primers fall out.  Have one SM rifle I did and it has 12 firings on it so far so I think if I do them all the same they'll last. 
You can fix your case with no issues I bet.
GT
  

"To invent, you need a good imagination and a pile of junk"  T. A. Edison
"The trouble ain't that there is too many fools, but that the lightning ain't distributed right" M.T.
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12678
Location: Why, out West of course
Joined: May 29th, 2006
Re: 32-40 case failure help.
Reply #19 - Today at 12:33pm
Print Post  
I think solder will work fine. I've got some flux around here some place. 

The floral foam wads worked good on Saturday at Butte. Bore stayed sparkly clean using 14.8 gr 4227. Not so with TiteGroup powder. TiteGroup and the floral foam left a hard  coating in the throat. Had to use steel wool to remove it. Not as bad but the same with 1/8 inch cork wads. 
My thinking is the Titegroup being a fast powder did not create enough heat to consume the floral foam.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint