Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) Sharps Meacham conversion? (Read 496 times)
KCPitts
Newbie
*
Offline



Posts: 6
Joined: Oct 25th, 2026
Sharps Meacham conversion?
Nov 15th, 2026 at 12:22pm
Print Post  
Good morning, this is my first post and it might be a little long as I'm new to the Sharps world.  I just bought a 1863 Sharps that was converted to a sporting rifle and I'm trying to figure out exactly what I have.  I believe it's a "Meacham" style conversion as it appears to match the pictures and description in both the Sharps Collector guide and the Sellers book.  It does have what appears to be a factory 30" barrel with serial numbers on the bottom flat and in the forend. My questions are:
1. Am I right and this is a Meacham conversion?   

2. What caliber is it?  It was sold to me as a .45-70 but in one of the photos you can see it originally was marked 2 5/8.  I plugged the barrel and came up with .458 in the lands and .463 in the groves.  When I measured the chamber length I inserted a lyman 457125 bullet, and I come up with a cartridge OAL of 
3.465, so too long for 45-70.  45-100?  I'm willing to cast the chamber but I would need to order material.

3.How do I inspect it to make sure it's safe to shoot.  There seems to be a lot of space between the breech face and the chamber.  .015-.020 by my eyeball, but I need to go to the shop and get my feeler gauges.  Seems excessive.  And the wood on the stock has shrunk, leaving some space between it and the action and the heel has a small chunk of wood missing under the butt plate.  I'm not above fitting a newer stock for shooting and leaving the original one on for display.

4.I'm in the Kansas City area, is there anyone within a couple hours' drive that would know how to inspect one of these rifles?  I hesitate to take it to a gunsmith that works on AR's all day.   

Again, sorry for all the questions and long post, but I'm excited to finally acquire an original Sharps.  Never thought I'd get the opportunity.  And the detective work is kinda fun too!
  
Back to top
 
IP Logged
 
KCPitts
Newbie
*
Offline



Posts: 6
Joined: Oct 25th, 2026
Re: Sharps Meacham conversion?
Reply #1 - Nov 15th, 2026 at 12:33pm
Print Post  
Here's a few photos.  I can take more.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18431
Location: Oregon
Joined: Feb 2nd, 2009
Re: Sharps Meacham conversion?
Reply #2 - Nov 15th, 2026 at 1:22pm
Print Post  
2 5/8" is indeed the .45-100 cartridge.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
TomKlinger
Senior Forum Member
****
Offline



Posts: 315
Location: Central Florida
Joined: Feb 17th, 2019
Re: Sharps Meacham conversion?
Reply #3 - Nov 15th, 2026 at 2:58pm
Print Post  
Nice rifle! How is the bore?


Tom Klinger
  
Back to top
 
IP Logged
 
KCPitts
Newbie
*
Offline



Posts: 6
Joined: Oct 25th, 2026
Re: Sharps Meacham conversion?
Reply #4 - Nov 15th, 2026 at 6:47pm
Print Post  
Thanks Tom. The bore looks good, I can’t wait to shoot it.
  
Back to top
 
IP Logged
 
TomKlinger
Senior Forum Member
****
Offline



Posts: 315
Location: Central Florida
Joined: Feb 17th, 2019
Re: Sharps Meacham conversion?
Reply #5 - Nov 15th, 2026 at 8:31pm
Print Post  
It’s most likely a paper patch chamber. Are you familiar with paper patch bullets?




Tom Klinger
  
Back to top
 
IP Logged
 
KCPitts
Newbie
*
Offline



Posts: 6
Joined: Oct 25th, 2026
Re: Sharps Meacham conversion?
Reply #6 - Nov 15th, 2026 at 8:35pm
Print Post  
Not really.  I know what paper patched bullets are, but have never been around them. Are the chambers diffrent?
  
Back to top
 
IP Logged
 
TomKlinger
Senior Forum Member
****
Offline



Posts: 315
Location: Central Florida
Joined: Feb 17th, 2019
Re: Sharps Meacham conversion?
Reply #7 - Nov 15th, 2026 at 8:46pm
Print Post  
Yes they are intended to shoot bore diameter bullets. A correctly patched bullet will slide down the bore with slight resistance. Your case mouth needs to be sized to accept the bore diameter bullet. 
You mentioned 458 and 463. Your patched bullet needs to be 458/459.and a slip fit onto the brass. The chambers on paper patch guns are smaller at the neck for the bore dia. bullet.
Standard chamber would accept the 463 dia bullet.
Best thing to do is a chamber cast, then post pictures with the dimensions. We can look at it and tell you what you have.
Tom
  
Back to top
 
IP Logged
 
KCPitts
Newbie
*
Offline



Posts: 6
Joined: Oct 25th, 2026
Re: Sharps Meacham conversion?
Reply #8 - Nov 15th, 2026 at 8:51pm
Print Post  
Thanks Tom, I’ll order the material to cast the chamber and report back.
  
Back to top
 
IP Logged
 
TDW
Full Member
***
Offline



Posts: 125
Location: Montana and Missouri
Joined: Mar 21st, 2010
Re: Sharps Meacham conversion?
Reply #9 - Nov 16th, 2026 at 10:14am
Print Post  
KCPitts
I am in Lee’s Summit.

I spent 16 years as the head of the Final Assembly/ Final Inspection Dept at Shiloh Rifle Co., in Big Timber, Montana.

I’d be happy to look at your rifle for you.

I’ll send you a PM with my contact info.
Tom Winters
  

"The farther North you go, the more things you will run into that will eat your horse."
S.P. Garbe, Absaroka-Beartooth Wilderness, 1980
Back to top
 
IP Logged
 
bobw
Frequent Elocutionist
*****
Offline



Posts: 2270
Joined: Mar 19th, 2013
Re: Sharps Meacham conversion?
Reply #10 - Nov 16th, 2026 at 12:36pm
Print Post  
You might also contact Shon Eychaner, he is in St. Joseph, Mo.

I don’t know how much he knows about this particular type original Sharps, but he has built and converted some and does single shot gunsmith work for others.  I would first be concerned about that head space gap and it should be looked at.

Between Tom Winters and Shon you might get the answers you need.

PM me you want to pursue Shon.
Bob
  
Back to top
 
IP Logged
 
KCPitts
Newbie
*
Offline



Posts: 6
Joined: Oct 25th, 2026
Re: Sharps Meacham conversion?
Reply #11 - Nov 16th, 2026 at 6:40pm
Print Post  
Wow, it’s great to know there’s so much talent on KC!  I called Lee Shaver today and since I have Wednesday off and need a sight for another rifle I’m going to drive down and let him take a look. Thank you all, I’ll let you know what I find.
  
Back to top
 
IP Logged
 
George Babits
Frequent Elocutionist
*****
Offline



Posts: 1163
Joined: Sep 27th, 2012
Re: Sharps Meacham conversion?
Reply #12 - yesterday at 12:59pm
Print Post  
That does look like a Mecham conversion.  I have one and it looks very similar.   The checkering is a pretty good identifier. The usual final identifier as Mecham conversions have "English" style rifling.   Conversions done by Sharps have 6 groove standard rifling.   

George
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint