Hello I am Andrew and if you bought Bullets off gunbroker from a seller named blue falcon bullets that was him

In about 2021/2022 he got sick and had to quit rapidly selling 
Im sad to say that he passed recently (I say it again because i know for alot of people he just up and vanished)

Well i was recently going through his shop and found a huge amount of stock that ive talked about in a different post here

I dont want to break the rules and because it was so recent I dont know when ill get to do this more formal

I am hoping to sell his stock and see if there is enough interest in restarting Blue Falcon Bullets.

I will be making a master list soon but I have things priced 50 for paper patched and 30 for lube and sized and 35-40 for anything using pure lead per box ( i will nail this down in the next couple days once I make the master list)

Shipping will be through the post office in flat rate boxes and I am checking how to fit what for the best deals

For now I will be including alot of the pics of the stock I have so people have an idea

I appreciate how helpful this forum has been on this "grassroots" journey so  far and ill answer questions as I can

85lc wrote yesterday at 12:14pm:


Thank you for the kind words...honestly its only been a few days but if it keeps up like this...i honestly think we are set 

The amount of interest ive got on 32-40 is pretty crazy were with current orders I will be out 

So I would like to gage everyone's interest in a simple run of them
They would be either unlubed and sized to .318-.319 at 160gr at 25 a 100
Or
As dropped unlubed at probably .321 to .322 i think I will confirm this if I have interest at 20 a 100

Everything left from the run will at some point be lubed at sized to .321 but the cost will be 30 a 100

Of course a picture of the bullet in question

Shipping would be seperate

And ill wait a few days to see how many total we have

FYI:  A number of shooterws have 8mm (J bore) rifles that would use the sized & lubed 0.318" bullets.

Do yo also swage bullets?  If so, you can offer different weights for a particular diameter.

Again, best success.

And here is the mostly complete list of what i have in the shop:

43 Egyptian 
451 Volunteer 
58 cal Minnie ball
56 cal Minnie ball
.578 North & South Skirmish Minnie ball
44-77 (out of stock, please ask i have located the mold and could do a run)
54 cal Minnie ball
Swiss Feldstutzer
40-50 sharps
10.35 Glisenti & Bodeo
Martini Gahendra
M70 11.2 Werndl
40-60 marlin
Whitworth Volunteer. 451x 415gr
Martini Henry 
45-70
71/84
11mm mauser/ 43 mauser
50cal .515 450gr
50cal paperpatched .515 547
45cal ringtail sharps
25-20
Swiss Vetterli
54 Gallagher 
54 cal Spencer .548 385gr
Dutch Beaumont
54 cal ringtail sharps
577 Snider
54 sharps no tail
45 cal .445 300gr
M73 11.4 Werndl
Whitworth Pedersoli Gibbs
50 cal carbine Maynard/Smith Carbine
50-70
58 cal Minnie ball
8mm nambu
40-82 WCF
40 cal minnie max
Blackpowder Sillhoute 40 cal.
11mm Gras
7mm nambu
7.65 French Longue
Lyman plains rifle .454 285gr
40cal WCF oversized .410 254gr
32 colt
.318 J bore Mauser
42 Russian Berdan
32 Winchester special 
32 remington
32-40 (out of stock...for now  )
32 special
8mm roth steyr (out of stock)
50-95
14.5 wanzl
38-56 out of stock
401 winchester located mold
44-40 located mold
Burnside located mold
56-50 .523 dia believe 335 will recheck

Also with enough interest i could make some that i shoot:
300 savage
6.5 Carcano
303 british (my is a Martini Enfield carbine though)

To be fair not everything is paperpatched so I will be glad to help with any questions

Any 56-50?

Solidlead wrote Today at 10:32am:


I checked that mold and it drops at .523 Dia and I believe 335gr. Its a custom run mold so I would have to cast some to know 100%

John in PA wrote Today at 4:54pm:


Yeah i just checked and sadly everything for 45cal is lubed and sized. Didn't see .44

I found what I have of 40-50 and will had the labels to that one box and haven't figured out how my dad plastic wrapped them 
I do think I found everything to make a run i can keep you posted on. In .404 and .408 (will confirm when if i can make them but have to verify how much paper i have 

I know you have your bore diameters but I think id be able to do a run for both 40-50 and 40-70 is the diameter and 350gr works. 

Of course if you can give me the bore diameters youre working with i might be able to find something that could work