ASSRA Forum › General › Scopes and Sights › Lyman tang sight
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Lyman tang sight (Read 169 times)
Timetripper
Full Member
***
Offline



Posts: 151
Location: Carlisle
Joined: Mar 4th, 2013
Lyman tang sight
Aug 17th, 2026 at 11:16am
Print Post  
I have what I believe to be a Lyman #1 combination sight. Base is marked W and staff has Jan 28 '79 and May6 '84 patent dates, so I think it is for a '73 Win. It actually was on an older 1894 rifle.
Problem is that the center spring/ through bolt (or whatever it's called) has the threaded part broken off, as seen in picture.
Is this repairable or replaceable?
Sorry about the oversize pic.
John
 
   
  
Back to top
 
IP Logged
 
bobw
Frequent Elocutionist
*****
Offline



Posts: 2168
Joined: Mar 19th, 2013
Re: Lyman tang sight
Reply #1 - Aug 17th, 2026 at 11:51am
Print Post  
A used one would be best, don’t know if new are made by anyone. There use to be a couple guys that dealt in old sights, one was in Minnesota but I know he has retired.  There was another out west somewhere.  Maybe someone has picked up the inventories and can get you a spring.  I’m sure someone here in this forum will know.

That spring does a couple things.  It give the sight something to rotate on, and the bump or detent sets the up position of the sight for the rifle it is intended for.
Bob
  
Back to top
 
IP Logged
 
pmcfall
Senior Forum Member
****
Offline



Posts: 266
Location: St. Joseph, Missouri
Joined: Jan 27th, 2006
Re: Lyman tang sight
Reply #2 - Aug 17th, 2026 at 2:04pm
Print Post  
Check with Mike Maraccini 906-774-7731.  I know he works on Marbles tang sights but probably Lyman as well.  Nice guy.
Phil
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18209
Location: Oregon
Joined: Feb 2nd, 2009
Re: Lyman tang sight
Reply #3 - yesterday at 1:42pm
Print Post  
pmcfall wrote on Aug 17th, 2026 at 2:04pm:
Check with Mike Maraccini 906-774-7731.  I know he works on Marbles tang sights but probably Lyman as well.  Nice guy.
Phil


I heard Mike has branched out into repairing Lyman sights also. Haven't contacted him to be sure though.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.5410 seconds.