ASSRA Forum - FS Flexible delrin wiping rods

ASSRA Forum › General › For Sale/Trade › FS Flexible delrin wiping rods

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

FS Flexible delrin wiping rods (Read 742 times)

beltfed Frequent Elocutionist Offline Posts: 1854 Location: Central Wi Joined: Dec 20^th, 2007	FS Flexible delrin wiping rods Aug 6^th, 2026 at 6:40pm	Print Post
	Current available delrin rods as of 9/7/26: 4-- 5/16 delrin/acetal rods, 48" long, drilled and tapped BOTH ends with female 8-32 thread for common jags and brushes. These are suitable for 35 caliber on up. 3/8 inch rod, 48" long drilled and tapped BOTH ends female 8-32 thread for common jags and brushes. Suitable for 40 cal on up rifles. I expect to have them available in early October. Material on Order 9/8/26 NEW PRICING AS OF SEPTEMBER 14,2026 Rods are NOW $31 each, including shipping. DUE to increase in material cost by 20% and increase in postage. THis does not apply to existing orders. the $29 each will hold for you. State your wants here, and then PM me with order and I will verify and hold rod (s) Your personal check is OK beltfed/arnie
	« Last Edit: Sep 14^th, 2026 at 2:20pm by beltfed »

	IP Logged

jimmy Oldtimer Offline Now available in Oklahoma. Posts: 519 Location: Skiatook Joined: May 12^th, 2009	Re: FS Flexible delrin wiping rods Reply #1 - Aug 6^th, 2026 at 7:19pm	Print Post
	Hey Arnie, why did you chose beltfed on a single shot site? I'm in for one. Sending pm. Thanks.


	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1854 Location: Central Wi Joined: Dec 20^th, 2007	Re: FS Flexible delrin wiping rods Reply #2 - Aug 6^th, 2026 at 11:06pm	Print Post
	jimmy I was given that nickname when I was shooting High Power Service Rifle in rapid fire matches beltfed/arnie


	IP Logged

rollingblock Senior Forum Member Offline Posts: 399 Location: Texas part of New Mexico Joined: Aug 19^th, 2012	Re: FS Flexible delrin wiping rods Reply #3 - Aug 8^th, 2026 at 1:26pm	Print Post
	I will take one of the 5/16 and Will take one of the 3/8 Total of two rods John M.


	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1854 Location: Central Wi Joined: Dec 20^th, 2007	Re: FS Flexible delrin wiping rods Reply #4 - Sep 7^th, 2026 at 11:12pm	Print Post
	NOTE: I have more rod material on order as of 9/8/26 Expect to have 3/8" rods available early October. I do have 4 of the 5/16 finished rods in stock. beltfed/arnie


	IP Logged

RJ-35-40 Senior Forum Member Offline Posts: 371 Location: Saint Augustine Joined: Dec 7^th, 2016	Re: FS Flexible delrin wiping rods Reply #5 - Sep 8^th, 2026 at 7:18am	Print Post
	PM sent.. One of each size please.! Bob in St. Augustine beltfed wrote on Sep 7^th, 2026 at 11:12pm: NOTE: I have more rod material on order as of 9/8/26 Expect to have 3/8" rods available early October. I do have 4 of the 5/16 finished rods in stock. beltfed/arnie
	« Last Edit: Sep 8^th, 2026 at 7:23am by RJ-35-40 »

	IP Logged

fjrdoc Junior Member Offline Posts: 50 Joined: Dec 14^th, 2019	Re: FS Flexible delrin wiping rods Reply #6 - Sep 10^th, 2026 at 8:00am	Print Post
	Are there brass ends on these rods or is the Delrin drilled and tapped? Thanks


	IP Logged

silver Senior Forum Member Offline Posts: 255 Location: Central wi, Joined: Sep 20^th, 2016	Re: FS Flexible delrin wiping rods Reply #7 - Sep 10^th, 2026 at 2:56pm	Print Post
	Delrin drilled and tapped, no brass.


	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1854 Location: Central Wi Joined: Dec 20^th, 2007	Re: FS Flexible delrin wiping rods Reply #8 - Sep 14^th, 2026 at 2:19pm	Print Post
	PLEASE NOTE: I have had to increase the price per rod with shipping to $31. Sorry, but latest material cost went up 20% and so did postage. DOES NOT apply to existing orders. The existing orders still stand at $29 beltfed/arnie


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.5619 seconds.