Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 32-40 AA #9 (Read 204 times)
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2644
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
32-40 AA #9
Jul 22nd, 2026 at 8:49pm
Print Post  
A while back Dave (schuetzendave) told me they'd had better luck with AA #9 than with 4227.  I decided to do a test today with my CPA and it seems promising.   The muzzle velocities were way more consistent and I didn't even have to raise the muzzle like I do with my IMR-4227 loads.  It burned a little cleaner too.  I used Fed LR magnum match primers.

Best 100m 5-shot group was about 1380 fps and measured 0.6".   There also seemed to be something good at around 1420 fps but the winds were twitchier so it's not a fair comparison.

Chris.
  
Back to top
 
IP Logged
 
Jeff_Schultz
ASSRA Board Member
*****
Offline



Posts: 1667
Location: Ransomville, NY
Joined: Apr 25th, 2004
Re: 32-40 AA #9
Reply #1 - yesterday at 12:12am
Print Post  
More powder. Get up over 1500fps then you're doing business.
  

"We have met the enemy and he is us." Pogo

“There is no situation so bad that it cannot be made worse."

  Confidence- The feeling you get before you fully understand the situation.
Back to top
 
IP Logged
 
bnice
Frequent Elocutionist
*****
Offline



Posts: 1968
Location: Iowa
Joined: Nov 30th, 2006
Re: 32-40 AA #9
Reply #2 - yesterday at 7:27am
Print Post  
What bullet weight you two using
  
Back to top
 
IP Logged
 
Jeff_Schultz
ASSRA Board Member
*****
Offline



Posts: 1667
Location: Ransomville, NY
Joined: Apr 25th, 2004
Re: 32-40 AA #9
Reply #3 - yesterday at 8:17am
Print Post  
Mine is 218g in a 14 twist Shilen with 15.5g of H-108 (same as # 9).
  

"We have met the enemy and he is us." Pogo

“There is no situation so bad that it cannot be made worse."

  Confidence- The feeling you get before you fully understand the situation.
Back to top
 
IP Logged
 
Oakdale
Full Member
***
Offline



Posts: 114
Location: Maplewood, MN
Joined: Jun 7th, 2017
Re: 32-40 AA #9
Reply #4 - yesterday at 9:05am
Print Post  
I’m fairly new to the Schuetzen world. This is my second year of using a new CPA in our local matches.

However, having shot almost 30-years in CBA matches, I can recall Accurate #9 powder being used quite often by shooters in the Plain Base Bullet match rifle category. It seemed like everyone in the category used that powder.

I did use #9 in some revolver loads. But today it’s quite interesting to learn of the variety of other powders that you guys on this forum are fooling with in your single shot rifles.

Tom
  
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2644
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: 32-40 AA #9
Reply #5 - yesterday at 9:18am
Print Post  
I was shooting a 200gr bullet that Steve Brooks made for me.  A Pope style. I hadn't heard much of AA #9 in the 32-40 so I thought I'd start this post.

I've never tried anything in the 1500 fps range. When do you start running into pressure problems? The highest I've tried in my 32-40's has been in the mid 1400's which seems to work pretty well with my spitzer style molds.

Chris
  
Back to top
 
IP Logged
 
bpjack
Frequent Elocutionist
*****
Offline



Posts: 3842
Location: East Olympia, WA
Joined: May 18th, 2008
Re: 32-40 AA #9
Reply #6 - yesterday at 4:38pm
Print Post  
Chris,
I don’t shoot #9 but with that 3 groove Borton/Darr designed bullet, I have upped my velocity using 4100 powder to just under 1500 fps in my 14 twist Green Mountain barreled high wall and it is shooting very well. I just finished a CBA match and despite a few wrong guesses when reading the wind came in a close second to the match director who is one of the best single shot shooter in the area who holds a couple of CBA national records. I used to strive for around 1450 but accuracy fell off in the wind. Out of the 40 shots today only a couple surprised me with their impact.
  

People who think they know everything are a great annoyance to those of us who do.
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2644
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: 32-40 AA #9
Reply #7 - yesterday at 4:50pm
Print Post  
Interesting.  Well, I'll try it since it works for you and Jeff.   Since I only have 200m instead of 200 yards it might help.  It seems way easier to shoot small groups at 100m than at 200m right now. 

I'm going to have to mix up a fresh batch of Alberta Schuetzen Lube.  CPA says they can't send Javelina out of the country.  Must be good stuff!   Right now I'm using the DGL lube I use for black powder shooting.  It seems to work, but it makes the bullets slippery like a greased pig.  It's sometimes hard to get them out of the tray and into the breech seater  Cheesy
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint