ASSRA Forum › General › For Sale/Trade › .439 sizing die
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic .439 sizing die (Read 184 times)
condorsc
Full Member
***
Offline


NRA Life/Benefactor, ASSRA,
SCV Life

Posts: 211
Location: Beaufort, S.C.
Joined: Nov 13th, 2021
.439 sizing die
Yesterday at 6:52am
Print Post  
WTB a Lyman .439 sizing die. Luckily acquired a .43 Spanish mold reasonable, now for the holy grail.
  
Back to top
 
IP Logged
 
YippyKiYay
Junior Member
**
Offline



Posts: 83
Location: Wichita Falls Texas
Joined: Apr 4th, 2026
Re: .439 sizing die
Reply #1 - yesterday at 7:09am
Print Post  
I recently found one in ebay for decent price.  Also a top punch.  I have 2 rolling block in 43 Spanish,  a cool carbine I need to shoot.  I've shot my rifle a few times,  using a mild smokeless load.   
Good luck.  I like mine
  
Bring Enough Gun
Back to top
 
IP Logged
 
Triggerfinger
Participating Member
*
Offline



Posts: 12
Joined: Oct 13th, 2024
Re: .439 sizing die
Reply #2 - yesterday at 11:45am
Print Post  
Sent you a PM, but it may be cheaper at a place I'll send in another PM.
  
Back to top
 
IP Logged
 
condorsc
Full Member
***
Offline


NRA Life/Benefactor, ASSRA,
SCV Life

Posts: 211
Location: Beaufort, S.C.
Joined: Nov 13th, 2021
Re: .439 sizing die
Reply #3 - yesterday at 4:17pm
Print Post  
YippyKiYay wrote yesterday at 7:09am:
I recently found one in ebay for decent price.  Also a top punch.  I have 2 rolling block in 43 Spanish,  a cool carbine I need to shoot.  I've shot my rifle a few times,  using a mild smokeless load.  
Good luck.  I like mine

 
I usually use 18 grains of IMR 4198 for BP rifles, never a problem. What is your favorite load?
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 4502
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: .439 sizing die
Reply #4 - yesterday at 4:59pm
Print Post  
Condorsc have you slugged the barrel? Often they are larger than .439. I had a very nice rifle that was 446.
« Last Edit: yesterday at 5:13pm by oneatatime »  
Back to top
 
IP Logged
 
steveu
Full Member
***
Offline



Posts: 113
Joined: Aug 21st, 2023
Re: .439 sizing die
Reply #5 - Today at 1:21pm
Print Post  
You will probably be better off pan lubing the bullets, especially if they are .441-.443.  Larger diameter bullets will shoot better than any of them sized to .439".  What is the ID of a fired case neck?

Cheers,
Steve
  
Back to top
 
IP Logged
 
YippyKiYay
Junior Member
**
Offline



Posts: 83
Location: Wichita Falls Texas
Joined: Apr 4th, 2026
Re: .439 sizing die
Reply #6 - Today at 1:45pm
Print Post  
condorsc wrote yesterday at 4:17pm:
YippyKiYay wrote yesterday at 7:09am:
I recently found one in ebay for decent price.  Also a top punch.  I have 2 rolling block in 43 Spanish,  a cool carbine I need to shoot.  I've shot my rifle a few times,  using a mild smokeless load.  
Good luck.  I like mine

 
I usually use 18 grains of IMR 4198 for BP rifles, never a problem. What is your favorite load?


I use 16.0grs is unique,  or 14.6gr of SB-620.  The cases aren't smoky,  feels almost like a 45-70.  Shoots truck tire MOA offhand at 100yd.   
SB-620 is a Serbian powder I got surplus from GB. It was tested at SB White and has 10% more pressure than Unique.  I've used it in my 56-50 Spencer,  my 577 Snider and the 43. I was running bullets as cast, they were slightly over size.
  
Bring Enough Gun
Back to top
 
IP Logged
 
YippyKiYay
Junior Member
**
Offline



Posts: 83
Location: Wichita Falls Texas
Joined: Apr 4th, 2026
Re: .439 sizing die
Reply #7 - Today at 1:51pm
Print Post  
oneatatime wrote yesterday at 4:59pm:
Condorsc have you slugged the barrel? Often they are larger than .439. I had a very nice rifle that was 446.


My 43 rifle has sharp crisp rifling,  I used a 454 CNB conical to slug it.  It is a prefect .439.
It was advertised as a possible 45-70.  I was hoping, ( dreaming) it was a 44-77.  But it didn't happen.  Although my 44-77 brass fits,  the bore was wrong. 
My carbine has a slight amount of wear,  but still great rifling for a carbine.  It isn't a cut down rifle,  but a true carbine.  Again,  it was billed as a 45-70,  but it wasn't. I haven't slugged it,  but I haven't shot it either.  I need it to cool down below 100f .
  
Bring Enough Gun
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2355 seconds.