ASSRA Forum › General › Single Shot Rifles › Questions RE: C Sharps Arms 1885
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Questions RE: C Sharps Arms 1885 (Read 302 times)
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18080
Location: Oregon
Joined: Feb 2nd, 2009
Re: Questions C Sharps Arms 1885
Reply #15 - Today at 2:37pm
Print Post  
bobw wrote Today at 1:10pm:
EVR wrote Today at 12:49pm:
calledflyer wrote Today at 11:20am:
one other thing to check is the link. It could be in backwards or the nub to engage the fin on the f.p. worn or poorly formed. Seen that twice, but in old guns. New link or correct assembly may work wonders.


Do new C Sharps Arms parts fit originals?


Yes, at least in the case of an original take-down frame I have.  My frame had the double set triggers and sear but nothing else.  Long story that I won’t get into, but C. Sharps put all the parts in, and have it working as far as I can tell at this point, and they have the information to build a take-down action now.
Bob


Bob is there any difference between coil spring and flat spring actions as it pertains to a DST lower tang assembly?
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.0265 seconds.