ASSRA Forum › General › Reloading the Single Shot Rifle › 375 Winchester Brass
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 375 Winchester Brass (Read 106 times)
RJ-35-40
Senior Forum Member
****
Offline



Posts: 316
Location: Saint Augustine
Joined: Dec 7th, 2016
375 Winchester Brass
Yesterday at 1:18pm
Print Post  
Some time ago I recall someone saying they use 375 Winchester brass as the parent case for another cartridge but I can't recall what that cartridge is.... Anyone else use it as a parent case for another cartridge other than 375 Win...?

My understanding is that it can be used as a case for 38-55 and due to it's reported thicker web it can hold higher pressures than the standard 38-55 case. 

Any thoughts.. Ferris...?
  
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 3958
Joined: Mar 9th, 2015
Re: 375 Winchester Brass
Reply #1 - yesterday at 1:51pm
Print Post  
you could form any of the cases chambered in the model 94 from .25-35 to that ol' .375 if you want to go to the trouble. 
as far as those cases absorbing higher pressure... I'd like to see a sectioned hull compared to, say, a .30-30. before the cutting I'd wager that they just ain't any difference. and, the gun is more the concern as to high pressure anyhow.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18027
Location: Oregon
Joined: Feb 2nd, 2009
Re: 375 Winchester Brass
Reply #2 - yesterday at 2:28pm
Print Post  
If you used it for .32-40 or .38-55 the brass will be short.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
bullshop
Senior Forum Member
****
Offline



Posts: 362
Joined: Sep 14th, 2017
Re: 375 Winchester Brass
Reply #3 - yesterday at 3:26pm
Print Post  
Dont believe everything you hear. Sectioned cases for all cartridges based on the 30-30 size case head are all the same, at least all that I have seen.
The heavier or thicker web in the 375 win case was a myth, an advertising hoax to boost sales. 
  If the web was thicker then the internal case volume would be reduced.
I believe the original big bore 94 had some extra steel (wider) behind the locking lug.
  
Back to top
 
IP Logged
 
jimmy
Senior Forum Member
****
Offline


Now available in Oklahoma.

Posts: 466
Location: Skiatook
Joined: May 12th, 2009
Re: 375 Winchester Brass
Reply #4 - yesterday at 3:38pm
Print Post  
I have some 7mm international rimmed cases someone formed from 375. They were cheap. Haven't tried loading them yet.
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 4463
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: 375 Winchester Brass
Reply #5 - yesterday at 4:41pm
Print Post  
Back when I had an FFL I bought a new American Bald Eagle Commemorative 375 from the distributor and kept it for a year or two in the box and then sold it to a friend for $300.
Bet it is worth more than that now.
  
Back to top
 
IP Logged
 
Skalkaho
Oldtimer
*****
Offline



Posts: 860
Location: Montana
Joined: Sep 29th, 2006
Re: 375 Winchester Brass
Reply #6 - yesterday at 7:36pm
Print Post  
You'll drop about 6 or more grains of water using as a 32-40 sized down.It is beefier A 375 Starline brass weighs 158.40  give/take
Winchester 38-55 weighs 137.80 give/take.   Do the math,have fun. Been playing with this brass since it came out and I bought a win 375 Big bore Carbine in 1979,was my pack around gun while in  Alaska logging camps back then. Ya I got razzed by guys on the gun...but at least I HAD A gun in my hand while in the bush fishing and they didnt..LOL...so shoot them in the foot if a Brownie charges and run....
  
May the Bullet Gods be with you.......
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1776 seconds.