ASSRA Forum - .25 rim fire to .22

ASSRA Forum › General › General Discussion › .25 rim fire to .22

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

.25 rim fire to .22 (Read 217 times)

Babydriver Senior Forum Member Offline Posts: 250 Joined: Mar 22^nd, 2024	.25 rim fire to .22 Yesterday at 5:32pm	Print Post
	If I had a Ballard in .25 rim fire could it be sleeved in .22 and work? Or does something have to change on the breech block? Thanks


	IP Logged

jimmy Senior Forum Member Offline Now available in Oklahoma. Posts: 446 Location: Skiatook Joined: May 12^th, 2009	Re: .25 rim fire to .22 Reply #1 - yesterday at 6:43pm	Print Post
	Allegedly, the firing pin works but you will have to weld up the extractor and recut for the smaller case.


	IP Logged

Babydriver Senior Forum Member Offline Posts: 250 Joined: Mar 22^nd, 2024	Re: .25 rim fire to .22 Reply #2 - yesterday at 7:56pm	Print Post
	Thanks. But that’s not up my alley. Kow anyone that could do it?


	IP Logged

Dellet Frequent Elocutionist Online Posts: 1270 Joined: May 19^th, 2017	Re: .25 rim fire to .22 Reply #3 - yesterday at 8:17pm	Print Post
	If it was originally a 22 and bored to 25 the block might work. If it was originally a 32 and rebarreled to 25, it might work. If it was originally a 32, changed to 25, the block will likely need to be replaced or altered to change to 22. Then there is the extractor issue It’s not likely it was originally a 25


	IP Logged

jimmy Senior Forum Member Offline Now available in Oklahoma. Posts: 446 Location: Skiatook Joined: May 12^th, 2009	Re: .25 rim fire to .22 Reply #4 - Today at 7:27am	Print Post
	Babydriver wrote yesterday at 7:56pm: Thanks. But that’s not up my alley. Kow anyone that could do it? John Taylor here on the forum.


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 17922 Location: Oregon Joined: Feb 2^nd, 2009	Re: .25 rim fire to .22 Reply #5 - Today at 9:29am	Print Post
	If you find a Ballard in .25 RF it's either been bored out from .22 Long, or rebarreled. When the .25RF first came out the Ballard production had already ended, so none were ever made in .25RF.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Bent_Ramrod Frequent Elocutionist Offline Posts: 1573 Location: Southern Arizona Joined: Feb 8^th, 2006	Re: .25 rim fire to .22 Reply #6 - Today at 3:49pm	Print Post
	I found a shot-out Ballard .22 that had been rebored by the Stevens Company to .25 Stevens rim fire (noted on the barrel by a stamping) and shot out again. I got the barrel lined back to .22 (Long Rifle this time). The same position of firing pin on the breechblock worked for both cartridges.


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.5246 seconds.