ASSRA Forum › General › Single Shot Rifles › Stevens 47?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Stevens 47? (Read 180 times)
cedestech
Participating Member
*
Offline



Posts: 40
Joined: Aug 12th, 2017
Stevens 47?
Yesterday at 10:52am
Print Post  
What action is this? Larger then 44, mechanically similar. 

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
Dellet
Frequent Elocutionist
*****
Offline



Posts: 1247
Joined: May 19th, 2017
Re: Stevens 47?
Reply #1 - yesterday at 11:03am
Print Post  
Probably a model 44 Schuetzen. It was a large frame 44 action, with double set triggers. 

The action was 1.25” wide instead of 1.125”. Big difference was the height. Being about 2” instead of 1 3/4.

Hope you have the whole rifle, not real common.
  
Back to top
 
IP Logged
 
cedestech
Participating Member
*
Offline



Posts: 40
Joined: Aug 12th, 2017
Re: Stevens 47?
Reply #2 - yesterday at 11:34am
Print Post  
Yep, entire rifle in good shape with new barrel but needs new pivot screws I hope. Lever doesn’t quite over center and latch lever up. 

Guess I’ll need to have the screws made as opposed buying some.
  
Back to top
 
IP Logged
 
Dellet
Frequent Elocutionist
*****
Offline



Posts: 1247
Joined: May 19th, 2017
Re: Stevens 47?
Reply #3 - yesterday at 12:00pm
Print Post  
There are screws out there, need to identify which style you need and if the where is in the pin, link, lever or all three. 

There were 2 different diameters of screws, and also what was basically a two headed screw.

CPA has some of them.
  
Back to top
 
IP Logged
 
Sure shot
Frequent Elocutionist
*****
Offline



Posts: 1121
Location: East central Iowa
Joined: Jun 22nd, 2020
Re: Stevens 47?
Reply #4 - yesterday at 2:43pm
Print Post  
Take a close look at the link and link pins, the holes in the link are commonly worn oblong. 
You should have a nice rifle when you get it finished. Really nice case colors on your action.
« Last Edit: yesterday at 6:13pm by Sure shot »  
Back to top
 
IP Logged
 
cedestech
Participating Member
*
Offline



Posts: 40
Joined: Aug 12th, 2017
Re: Stevens 47?
Reply #5 - yesterday at 5:40pm
Print Post  
Put completely back together and all is well. Basically just needed some maintenance. Looks like it should be a shooter. Going to verify it shoots well then need to send some pieces off to be blued. Breech and barrel are in the white and someone has already gone to town on the butt so I’m going to finish it off for use with BPCR. 

(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8683 seconds.