ASSRA Forum - Putting primers in 1873 Maynard coke bottle brass

ASSRA Forum › General › Reloading the Single Shot Rifle › Putting primers in 1873 Maynard coke bottle brass

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Putting primers in 1873 Maynard coke bottle brass (Read 157 times)

Babydriver Full Member Offline Posts: 227 Joined: Mar 22^nd, 2024	Putting primers in 1873 Maynard coke bottle brass Jan 29^th, 2026 at 9:01pm	Print Post
	I have the proper shell holder but it won’t fit my RCBS hand primer. Too thick. Suggestions? Thanks


	IP Logged

rifleman Senior Forum Member Offline Posts: 372 Joined: Aug 4^th, 2015	Re: Putting primers in 1873 Maynard coke bottle brass Reply #1 - Jan 29^th, 2026 at 9:09pm	Print Post
	Not knowing the dimensions of the brass, would something like a Marlin 1881 hand tool work in a cartridge big enough for yours to fit and prime it the old fashioned way? Thats an expensive solution.


	IP Logged

Babydriver Full Member Offline Posts: 227 Joined: Mar 22^nd, 2024	Re: Putting primers in 1873 Maynard coke bottle brass Reply #2 - Jan 29^th, 2026 at 9:14pm	Print Post
	I have the proper fitting shell holder. It’s just like any Rcbs shell holder except it is thicker so it won’t fit in the opening.


	IP Logged

GunBum Senior Forum Member Offline Posts: 267 Location: SW Missouri Joined: Oct 30^th, 2021	Re: Putting primers in 1873 Maynard coke bottle brass Reply #3 - Jan 29^th, 2026 at 10:12pm	Print Post
	Press mounted primer Similar to this: (You need to *Login* or *Register* to view media files and links) Or this (You need to *Login* or *Register* to view media files and links) Lyman, Redding, and Hornady make/made similar priming arms for their presses. Not my favorite to use, but if you have a caliber that won’t let you use the hand primer, it’s a viable option.
	« Last Edit: Jan 29^th, 2026 at 11:26pm by GunBum »

	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.0958 seconds.