ASSRA Forum - 30-40 Krag Highwall?

ASSRA Forum › General › General Discussion › 30-40 Krag Highwall?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

30-40 Krag Highwall? (Read 349 times)

jhm Frequent Elocutionist Offline Posts: 1921 Location: georgia Joined: Sep 4^th, 2011	30-40 Krag Highwall? Dec 17^th, 2025 at 11:24am	Print Post
	Been toying with the idea of doing a hi-wall in 30-40 Krag. It is 40-70 now and I haven't shot it since our silhouette matches ceased several years ago. The recent posts on the Krag round got my interest up and I have some brass on hand. Would probably shoot it more often than now. Comments or concerns? JMH


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 17459 Location: Oregon Joined: Feb 2^nd, 2009	Re: 30-40 Krag Highwall? Reply #1 - Dec 17^th, 2025 at 12:11pm	Print Post
	I think changing barrels is fine, but it often is a temporary solution, and later might get the urge to have the .40-70 again. I personally would keep an eye out for a project rifle with a poor bore and put a .30-40 barrel on it, and keep the .40 as it is.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

joelpend Participating Member Offline Posts: 40 Location: Central North Carolina Joined: Dec 29^th, 2015	Re: 30-40 Krag Highwall? Reply #2 - Dec 17^th, 2025 at 12:17pm	Print Post
	What would be the intended use? More information is needed for one to make comment about the 30-40 for that use.


	IP Logged

vbull Full Member Offline Posts: 109 Location: Lake George, Champlain region Joined: Sep 19^th, 2004	Re: 30-40 Krag Highwall? Reply #3 - Dec 17^th, 2025 at 4:08pm	Print Post
	I have one in 30-40 and been using it with jacketed bullets on white tails. Very accurate with 180 grain bullets but is too heavy (for me) to lug around in the woods. I have just brought it back out to shoot cast bullets but haven't hit on a great load yet. I made a custom base to mount a Unertl Vulture scope. I found the CCDST action in a pawn shop but was in 6mm x 30-30 Ackley. I came across an original 30-40K barrel and was very surprised it timed up perfectly. I was able to re-cut the extractor and away we went.


	IP Logged

gunlaker Frequent Elocutionist Offline Posts: 2516 Location: lower mainland, B.C. Joined: Dec 13^th, 2010	Re: 30-40 Krag Highwall? Reply #4 - Dec 17^th, 2025 at 4:27pm	Print Post
	I have a 30-40 barrel for one of my CPA's. I've only shot it a little bit as I'm more interested in the 38-50 barrel. To be honest I would rather have a 30-30 or maybe a 30-30AI barrel instead. It seems that there are more die options with the 30-30 case. I am a fan of the Lee Collet dies for instance, to control neck tension. Those aren't available for 30-40. I do have a highwall in 30-30 and it's very accurate with 168 amax bullets. Chris.


	IP Logged

Bulseyetom Oldtimer Offline Posts: 995 Location: Santa Maria, Ca Joined: Oct 31^st, 2010	Re: 30-40 Krag Highwall? Reply #5 - Dec 17^th, 2025 at 6:53pm	Print Post
	My HiWall in 30-40 (30Army) shoots lights out with an Accurate Moulds 200 grain gas check bullet and 20 grains of IMR 4227. I just neck size then use an M Die to expand and seat to where it almost touches the lands. Tom


	Twitter IP Logged

Jonathan Participating Member Offline Posts: 25 Location: THE GOOD PART OF NY Joined: Sep 5^th, 2025	Re: 30-40 Krag Highwall? Reply #6 - Dec 17^th, 2025 at 9:07pm	Print Post
	The Lee collet dies are available from Lee on a custom basis. Very reasonable cost and quick turn around. I just neck size and seat the Lyman 311284 so that it is just touching the lands. I also index each round when chambering and if I'm feeling real picky I'll index each bullet to the case. IMR 4198 is the best powder for me at 22grains with IMR 3031 a close second. Murder on game and M.O.A. is not uncommon.


	IP Logged

Old Soldier Senior Forum Member Offline Posts: 345 Location: North Pole, Alaska Joined: Oct 17^th, 2015	Re: 30-40 Krag Highwall? Reply #7 - Dec 18^th, 2025 at 1:09pm	Print Post
	Amount my many sins I read Townsend Whelen. So, have wanted a rifle like his Salina since I first read about it. I had a Highwall in 32-40 who's barrel was pitted so I had a Douglas premium made to match the Winchester #3 30"barrel but in 30-40 Krag. My rifle has a blued receiver, but a leaf spring action. My gunsmith told me the action is rather soft, so to keep my loads down. Further study (which I should have done first) is confusing. Several sources say that the blue receiver is OK for the 30-40, but those usually have the coil spring action. My action has the barrel mounted leaf spring. Other sources say the 85 is plenty strong for the 30-40 or most anything else. Who knows? I love the 30-40 round and have several Kags. It is also quite traditional for Alaska, as we were not settled until circa 1910. Our troops the 9th Infantry were the first to be issued the Krag. Any way, my rifle shoots cast lead wonderfully. It also shoot 220 RN jacketed quite well with Whelen's load. I love it. Haven't killed anything with it,YET. Good luck with your 30-40.

	"White man have very strong Medicine. Shoot today maybeso kill you tomorrow." Esa-Tai Commanche warrior
	IP Logged

oneatatime Frequent Elocutionist Offline Posts: 4220 Location: Rocky Mountains Joined: Oct 30^th, 2011	Re: 30-40 Krag Highwall? Reply #8 - Dec 18^th, 2025 at 3:11pm	Print Post
	Here's my 30-40 flat spring highwall with a 22 inch sporter barrel. There is more information in the reloading section.


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.6795 seconds.