ASSRA Forum - Remington 1 1/2 action and stock set

ASSRA Forum › General › For Sale/Trade › Remington 1 1/2 action and stock set

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1]

Hot Topic (More than 10 Replies)

Remington 1 1/2 action and stock set (Read 1366 times)

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Remington 1 1/2 action and stock set Dec 14^th, 2025 at 12:38pm	Print Post
	Rim fire action. Firing pin is frozen in the block, one spring is broke, everything is here except the extractor. Stock set in very good condition. $750 plus postage. Personal check or postal money order. (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links)
	« Last Edit: Dec 14^th, 2025 at 6:15pm by Heidinnprudr »

	IP Logged

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Re: Remington 1 1/2 action and stock set Reply #1 - Dec 22^nd, 2025 at 9:29am	Print Post
	$700 including postage, personal check or postal money order


	IP Logged

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Re: Remington 1 1/2 action and stock set Reply #2 - Dec 27^th, 2025 at 7:45am	Print Post
	$650 including postage, personal check or postal money order


	IP Logged

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Re: Remington 1 1/2 action and stock set Reply #3 - Jan 3^rd, 2026 at 2:16pm	Print Post
	$615 postage included


	IP Logged

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Re: Remington 1 1/2 action and stock set Reply #4 - Jan 11^th, 2026 at 10:58am	Print Post
	$575.00 including postage


	IP Logged

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Re: Remington 1 1/2 action and stock set Reply #5 - Jan 14^th, 2026 at 10:08pm	Print Post
	$550 including postage


	IP Logged

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Re: Remington 1 1/2 action and stock set Reply #6 - Jan 15^th, 2026 at 6:35pm	Print Post
	Boxed up and ready to go $521.95 shipped USPS priority flat rate box.


	IP Logged

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Re: Remington 1 1/2 action and stock set Reply #7 - Jan 17^th, 2026 at 5:12pm	Print Post
	$500 shipped


	IP Logged

JKR Full Member Offline Posts: 107 Joined: Nov 2^nd, 2021	Re: Remington 1 1/2 action and stock set Reply #8 - Jan 17^th, 2026 at 6:23pm	Print Post
	You said it was a rimfire. What cartridge? Did you take off the original barrel? Could it be made into an 22 LR or would it require a different block? Are the missing and broken parts available anywhere? I have very little knowledge of rollers.


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 17569 Location: Oregon Joined: Feb 2^nd, 2009	Re: Remington 1 1/2 action and stock set Reply #9 - Jan 17^th, 2026 at 6:30pm	Print Post
	JKR wrote on Jan 17^th, 2026 at 6:23pm: You said it was a rimfire. What cartridge? Did you take off the original barrel? Could it be made into an 22 LR or would it require a different block? Are the missing and broken parts available anywhere? I have very little knowledge of rollers. I can answer some of your questions. Since the #1 1/2 and #1 share almost all parts, there's no problem getting parts for a #1 1/2. Likely either Womack's Rolling Block Parts, or Numrich Gun Parts will have any of those parts you might need.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

jimmy Senior Forum Member Offline Now available in Oklahoma. Posts: 386 Location: Skiatook Joined: May 12^th, 2009	Re: Remington 1 1/2 action and stock set Reply #10 - Jan 17^th, 2026 at 9:11pm	Print Post
	I have what I think is a 1 1/2 barrel. .850 major diameter and 1.4 inches long thread. It will screw into a #2 action but is too long. Marked Remington Arms and 25 CF, serial number 4213. The bore is .320 with calipers so it may have been drilled out. A 32-20 case fits loose in the chamber. Will list it if someone buys this and is interested.


	IP Logged

JKR Full Member Offline Posts: 107 Joined: Nov 2^nd, 2021	Re: Remington 1 1/2 action and stock set Reply #11 - Jan 18^th, 2026 at 8:11am	Print Post
	My interest would be a bpcr 22. That’s why I asked about the breech block. If it was originally for a bigger rimfire cartridge, the firing pin wouldn’t be positioned for the 22, correct? Would an extractor for a 22LR have to be made by a machinist? Is the firing pin frozen by rust or is it the retaining screw?


	IP Logged

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Re: Remington 1 1/2 action and stock set Reply #12 - Jan 18^th, 2026 at 9:50am	Print Post
	Hello, Yes, I took the barrel off, barrel was chambered in 22. Firing pin is rusted/frozen in place, soaking it may release it, however, I would cut it out and bush the breach block for a new firing pin hole. Parts are plentiful, same as a #1, also easy to make or modify. Hope this helped, Nathan


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 17569 Location: Oregon Joined: Feb 2^nd, 2009	Re: Remington 1 1/2 action and stock set Reply #13 - Jan 18^th, 2026 at 11:02am	Print Post
	JKR wrote on Jan 18^th, 2026 at 8:11am: My interest would be a bpcr 22. That’s why I asked about the breech block. If it was originally for a bigger rimfire cartridge, the firing pin wouldn’t be positioned for the 22, correct? Would an extractor for a 22LR have to be made by a machinist? Is the firing pin frozen by rust or is it the retaining screw? A good welder can easily build up the extractor to make enough length to work for .22RF cases. It needs to be tig welded, and I have a young guy whose done several for me on different projects.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

RBKenn Senior Forum Member Offline Posts: 307 Location: fallon Joined: Apr 8^th, 2011	Re: Remington 1 1/2 action and stock set Reply #14 - Today at 4:17pm	Print Post
	Just remember the #1 sporting uses a straight bar extractor while the #1 1/2 uses a rotary extractor. Also the #1 sporting is typically 1.245 inches wide while the #1 1/2 is narrower (about 1.18 wide).


	IP Logged

JKR Full Member Offline Posts: 107 Joined: Nov 2^nd, 2021	Re: Remington 1 1/2 action and stock set Reply #15 - Today at 5:47pm	Print Post
	Ken, Where would a person find a rotary extractor for a 22 RF?


	IP Logged

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Re: Remington 1 1/2 action and stock set Reply #16 - Today at 7:13pm	Print Post
	That is correct.


	IP Logged

Heidinnprudr Participating Member Offline Posts: 17 Joined: Sep 18^th, 2020	Re: Remington 1 1/2 action and stock set Reply #17 - Today at 7:16pm	Print Post
	JKR wrote Today at 5:47pm: Ken, Where would a person find a rotary extractor for a 22 RF? Ken sells rotary extractors, at Rolling Block Parts. If he doesn’t have one for a 22, one for a larger cartridge can be annealed and filed to fit, or weld on a blank and file to fit.


	IP Logged

Page Index Toggle

Pages: [1]

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.5676 seconds.