ASSRA Forum › General › Reloading the Single Shot Rifle › Who makes push through bullet sizers?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) Who makes push through bullet sizers? (Read 727 times)
hopkinskid
Junior Member
**
Offline


ASSRA Board Member

Posts: 96
Location: Hopkins, MI
Joined: May 12th, 2020
Who makes push through bullet sizers?
Oct 18th, 2025 at 10:32am
Print Post  
Anyone here make push through bullet sizers similar to the Lees?
NOE is done.
I need a .319 sizer with 20:1 alloy.
Geoff
  
Back to top
 
IP Logged
 
yamoon
Oldtimer
*****
Offline


NRA Life, ASSRA , GGCA,
MCA

Posts: 961
Location: Junction City Kansas
Joined: Feb 11th, 2012
Re: Who makes push through bullet sizers?
Reply #1 - Oct 18th, 2025 at 10:49am
Print Post  
Lee list .319 in their custom section. I have been shooting German schuetzen rifles for 40 years and have had the best results with as cast diameter.
Mike
  
Back to top
 
IP Logged
 
Statesrights
Senior Forum Member
****
Offline



Posts: 393
Location: Virginia
Joined: May 3rd, 2016
Re: Who makes push through bullet sizers?
Reply #2 - Oct 18th, 2025 at 11:19am
Print Post  
I think I have one I don’t need, Geoff. Will get back to you later today. 
Jim
  
Back to top
 
IP Logged
 
Skalkaho
Oldtimer
*****
Offline



Posts: 835
Location: Montana
Joined: Sep 29th, 2006
Re: Who makes push through bullet sizers?
Reply #3 - Oct 18th, 2025 at 11:40am
Print Post  
The Lee works great,same for my German gun.....
  
May the Bullet Gods be with you.......
Back to top
 
IP Logged
 
jlwwade
Participating Member
*
Offline



Posts: 46
Location: North GA
Joined: Jul 18th, 2007
Re: Who makes push through bullet sizers?
Reply #4 - Oct 18th, 2025 at 7:50pm
Print Post  
Graf and sons has the .319 Lee push through instock and also the .319 sizer for there APP PRESS. That press works great for sizing because it has a bullet feeder. Prefect for pan lubing and it’s cheap and it works!
  
Back to top
 
IP Logged
 
GT
Frequent Elocutionist
*****
Offline



Posts: 2261
Location: Northeast Wyoming
Joined: Jun 28th, 2015
Re: Who makes push through bullet sizers?
Reply #5 - Oct 19th, 2025 at 10:42pm
Print Post  
Geoff,
I have and use a Star but I don't know if there is anything new available, it may be worth a call to this guy.  Nothing out there compares but they're not cheap either.

(You need to Login or Register to view media files and links)

They still pop up on eBay occasionally too.
  
"To invent, you need a good imagination and a pile of junk"  T. A. Edison
"The trouble ain't that there is too many fools, but that the lightning ain't distributed right" M.T.
Back to top
 
IP Logged
 
Gerald
Participating Member
*
Offline



Posts: 38
Location: minnesota
Joined: Aug 14th, 2015
Re: Who makes push through bullet sizers?
Reply #6 - Oct 20th, 2025 at 7:21am
Print Post  
CH4D makes push through dies, not sure if this diameter is in stock with them but they will make one - challenger is the wait time if not in stock.
That said they work beautifully.
  
Back to top
 
IP Logged
 
.22-5-40
Oldtimer
*****
Offline



Posts: 820
Joined: Feb 13th, 2010
Re: Who makes push through bullet sizers?
Reply #7 - Oct 21st, 2025 at 6:18pm
Print Post  
Corbin will make reloading press nose first sizers, dia. Based on your alloy.
  
Back to top
 
IP Logged
 
Jeff_Schultz
ASSRA Board Member
*****
Offline



Posts: 1646
Location: Ransomville, NY
Joined: Apr 25th, 2004
Re: Who makes push through bullet sizers?
Reply #8 - Oct 21st, 2025 at 7:08pm
Print Post  
What would your alloy have to do with it?
  
"We have met the enemy and he is us." Pogo

“There is no situation so bad that it cannot be made worse."

  Confidence- The feeling you get before you fully understand the situation.
Back to top
 
IP Logged
 
rkba2nd
Frequent Elocutionist
*****
Offline



Posts: 2047
Location: earth
Joined: Feb 16th, 2009
Re: Who makes push through bullet sizers?
Reply #9 - Oct 21st, 2025 at 9:33pm
Print Post  
You might ask Corbin if they are the one asking.
  
rkba2nd
Back to top
 
IP Logged
 
hopkinskid
Junior Member
**
Offline


ASSRA Board Member

Posts: 96
Location: Hopkins, MI
Joined: May 12th, 2020
Re: Who makes push through bullet sizers?
Reply #10 - Oct 25th, 2025 at 11:14am
Print Post  
Thanks, everyone!
Jim Rowe was kind enough to send me one he had. 
I specified alloy because my understanding is that alloys of different hardness spring back different amounts after passing through the sizer. When NOE made a sizer for me they asked for the alloy in order to come closest to the bullet diameter after sizing.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6716 seconds.