ASSRA Forum › General › Single Shot Rifles › Ballard Rifle and Cartridge Company Value
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) Ballard Rifle and Cartridge Company Value (Read 945 times)
Dcred
Newbie
*
Offline



Posts: 2
Joined: Sep 16th, 2025
Ballard Rifle and Cartridge Company Value
Sep 23rd, 2025 at 1:54pm
Print Post  
Hello all; Just trying to get more information on a Ballard Rifle and Cartridge Company rifle. Made in Cody Wyoming, its a high wall in 45/70. its walnut stock is purdy, but far from  "high or Fancy grade" more like a working man's rifle. rear sight is about 5" tall, with a Hadley cup. front has a level and changeable inserts.They kinda looks like a picture of ones that was made in Ukraine? Rifle is in very good condition. Were these rifles considered good quality? when was it made and cost then? What would this rifle be worth today? Would putting a vintage scope on it reduce its value? My 66 year old eyes just can't focus like before. I've considered selling it to get the Sharps i have always wanted, with scope. I have taken it to a couple gun shows here in Indiana, but nobody seems to know it's history or value. I'll try to post pictures,but not very computer savy...lol Thanks in advance!
« Last Edit: Sep 23rd, 2025 at 2:32pm by Dcred »  
Back to top
 
IP Logged
 
rkba2nd
Frequent Elocutionist
*****
Offline



Posts: 2041
Location: earth
Joined: Feb 16th, 2009
Re: Ballard Rifle and Cartridge Company Value
Reply #1 - Sep 23rd, 2025 at 3:06pm
Print Post  
In my opinion they are as good or better than any built by Winchester. Just the name is missing.
  
rkba2nd
Back to top
 
IP Logged
 
rkba2nd
Frequent Elocutionist
*****
Offline



Posts: 2041
Location: earth
Joined: Feb 16th, 2009
Re: Ballard Rifle and Cartridge Company Value
Reply #2 - Sep 23rd, 2025 at 3:28pm
Print Post  
When it gets to value, probably best to check on auction sights, Guns international, or Wyoming Armory in Cody Wyoming as they are still making them last I was aware. Your rifle has a single set trigger and what appears to be a long range Soule sight with many being available in the +or- $500 range. You have a fine rifle. The Ballard rifle company in Cody made Ballard rifles for close to a couple decades and then 1885 Highwall's for a relatively short time. While in Cody, the best available people were employed to build both.
  
rkba2nd
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 17217
Location: Oregon
Joined: Feb 2nd, 2009
Re: Ballard Rifle and Cartridge Company Value
Reply #3 - Sep 23rd, 2025 at 4:37pm
Print Post  
You wont hurt it's value by having it D&T for target scope bases and adding a scope. Doubt anyone will even know it was done after it left the factory unless you tell them.
I'd darn sure rather have it than the Sharps. Simply because the Winchester 1885 action is a better action with a faster hammer fall.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2430
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Ballard Rifle and Cartridge Company Value
Reply #4 - Sep 23rd, 2025 at 6:37pm
Print Post  
It'd have a pretty good value.  I picked up a Wyoming Armory 1885 in 32-40 which I'm pretty sure uses the same action castings and basically built by the same people. It's more accurate than my CPA's and I think I paid $3500 for it.  No set trigger, but nice wood with fine checkering.

Chris.
  
Back to top
 
IP Logged
 
Babydriver
Full Member
***
Offline



Posts: 144
Joined: Mar 22nd, 2024
Re: Ballard Rifle and Cartridge Company Value
Reply #5 - Sep 25th, 2025 at 11:12am
Print Post  
Different folks, different strokes.
Taping for a scope ruins the rifle. Sure you can fill them in, put screws in but it will never be the same. 
Just my opinion.
  
Back to top
 
IP Logged
 
rkba2nd
Frequent Elocutionist
*****
Offline



Posts: 2041
Location: earth
Joined: Feb 16th, 2009
Re: Ballard Rifle and Cartridge Company Value
Reply #6 - Sep 25th, 2025 at 1:38pm
Print Post  
So, a fine No6 Ballard rifle fit with a Schoyen barrel, false muzzle and Peterson scope is ruined? Please send them to me, and I will gladly give you your ruined rifle price all day long. Just my opinion.  Best regards, Different f, Strokes
  
rkba2nd
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 17217
Location: Oregon
Joined: Feb 2nd, 2009
Re: Ballard Rifle and Cartridge Company Value
Reply #7 - Sep 25th, 2025 at 4:35pm
Print Post  
rkba2nd wrote on Sep 25th, 2025 at 1:38pm:
So, a fine No6 Ballard rifle fit with a Schoyen barrel, false muzzle and Peterson scope is ruined? Please send them to me, and I will gladly give you your ruined rifle price all day long. Just my opinion.  Best regards, Different f, Strokes


I have some of those ruined rifles and they didn't come at discounted prices.
(You need to Login or Register to view media files and links)
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
watchthewind
Frequent Elocutionist
*****
Offline



Posts: 1024
Location: Phoenix, AZ
Joined: Mar 10th, 2015
Re: Ballard Rifle and Cartridge Company Value
Reply #8 - Sep 25th, 2025 at 7:34pm
Print Post  
Drilling, tapping and installing blocks was a factory option. I see no problem with it.
  
ASSRA Member # 11408
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 17217
Location: Oregon
Joined: Feb 2nd, 2009
Re: Ballard Rifle and Cartridge Company Value
Reply #9 - Sep 25th, 2025 at 8:32pm
Print Post  
watchthewind wrote on Sep 25th, 2025 at 7:34pm:
Drilling, tapping and installing blocks was a factory option. I see no problem with it.


Exactly. How would anyone know if it was done when new, or today. 
Now if someone D&T the receiver it indeed would ruin the value.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
wcf3840
Senior Forum Member
****
Offline


ASSRA Life #299

Posts: 379
Location: Palatine
Joined: May 28th, 2007
Re: Ballard Rifle and Cartridge Company Value
Reply #10 - Sep 26th, 2025 at 2:15pm
Print Post  
Two Zischangs and a Pope in this bunch. I don't think I've lost any value.
  
Back to top
GTalk  
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2430
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Ballard Rifle and Cartridge Company Value
Reply #11 - Sep 26th, 2025 at 9:48pm
Print Post  
That Ballard highwall is a recently made rifle.  I wouldn't worry for a second about drilling and tapping it.  If it was an original Winchester 1885 rifle in good collectable condition that wasn't already drilled and tapped that would be different.

Chris.
  
Back to top
 
IP Logged
 
Dcred
Newbie
*
Offline



Posts: 2
Joined: Sep 16th, 2025
Re: Ballard Rifle and Cartridge Company Value
Reply #12 - Sep 30th, 2025 at 8:10am
Print Post  
Thank you for all the responses, the information was appreciated!
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.4945 seconds.