ASSRA Forum - A Question about Scopes on untapped barrels

ASSRA Forum › General › Collecting Single Shot Rifles › A Question about Scopes on untapped barrels

(Moderator Group: Moderator)

‹ No Topic | Next Topic ›

Pages: 1 [2]

A Question about Scopes on untapped barrels (Read 1321 times)

gunlaker Frequent Elocutionist Offline Posts: 2489 Location: lower mainland, B.C. Joined: Dec 13^th, 2010	Re: A Question about Scopes on untapped barrels Reply #15 - Nov 28^th, 2025 at 9:14pm	Print Post
	marlinguy wrote on Nov 28^th, 2025 at 5:12pm: I didn't know Stevens used different spacing on bases? I knew they used smaller screw sizes. I have two rare barreled single shots that both have oddball spacing on the bases. One is a Bremer High Wall with Schoyen barrel, and the other a Zettler Ballard. Neither uses standard bases, and I'm getting ready to mill one hole on bases to make it slotted to rework standard bases to fit both. Each rifle is different from each other too! I found that out by looking at Steve Earle's web site. When I measured the hole spacing on mine I thought they were just an oddball custom setup. I imagine mine was drilled and tapped a very long time ago. I cant imagine anyone in recent history that would have done it. Unfortunately one of the tiny screws is broken off in the hole. I guess the last time someone decided to take off the blocks. Chris.


	IP Logged

SchwarzStock Frequent Elocutionist Offline Posts: 1293 Location: SchwarzWald Joined: Mar 23^rd, 2010	Re: A Question about Scopes on untapped barrels Reply #16 - Today at 8:48am	Print Post
	I make to claim to this but it could be interesting, Command adhesive mounting strips: (You need to *Login* or *Register* to view media files and links)

	If your rifle is not in 7.62 and you can't hit what you are aiming at with de-linked machinegun ammo you are a pretender.
	IP Logged

Pages: 1 [2]

‹ No Topic | Next Topic ›

Page completed in 0.7689 seconds.