Any suggestions for loading 32-40, ideal 31947-160 gr other then 4198?  Thanks

Thanks. I’m not familiar with that powder so I’ll look it up. 

If you look at the top of the screen for this sections on the forum (Reloading the Single Shot Rifle) you'll see the screen shown below. Under the topic "Schuetzen Loads" you'll find many many .32-40 loads listed.

Babydriver wrote on Jul 25^th, 2025 at 12:26pm:


When I started, I used Ramshot Enforcer. I moved to H110 after a couple months, and have settled on 300MP. All used about the same load and shot well. I moved away from the enforcer because it would start to collapse the case after 100ish firings

Original ballard, 200 gr mos with 12.5 grs 4759 cork on powder.
Fbw  200 gr mos with 15.3 grs 4759 cork wad on powder.

That is the load I will today. I have an ideal 319247. 160-65. 
Thanks

Small update that may help you. Shot a personal best at my last match in some pretty heavy whipping wind. This match was our anniversary 100yd match (this is the scope bench rest target). Used a breech seated Paul Jones 180gr flat nose with Javelina lube, 14gr 300MP, and federal gold medal match magnum primers. We also shot 2 - 5 shot groups, first group was 0.990, and the second was 1.015. my rifle has a bit slower 1:16 twist, so the sweet spot seems to be the 180gr mark