ASSRA Forum - RCBS mold handles,, NEI modified.

ASSRA Forum › General › For Sale/Trade › RCBS mold handles,, NEI modified.

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

RCBS mold handles,, NEI modified. (Read 268 times)

axman Participating Member Offline Posts: 24 Joined: Feb 1^st, 2010	RCBS mold handles,, NEI modified. Jun 11^th, 2025 at 11:22pm	Print Post
	2 sets of RCBS mold handles modified by Walt Melander of NEI molds. In fine shape. His catalog said it was to keep a better alignment of mold halves in opening and closing. Spring loaded pins on each side of handle. These will still fit rcbs molds also. $65.00 Each Shipped in the USA Only


	IP Logged

Cbashooter Frequent Elocutionist Offline Posts: 1597 Location: Eastern Wa. Joined: Mar 31^st, 2018	Re: RCBS mold handles,, NEI modified. Reply #1 - Jun 11^th, 2025 at 11:30pm	Print Post
	I was at NEI in Scappoose Oregon when Walt showed me his first couple sets he made.I still have one and it's served well.


	IP Logged

yamoon Oldtimer Offline NRA Life, ASSRA , GGCA, MCA Posts: 943 Location: Junction City Kansas Joined: Feb 11^th, 2012	Re: RCBS mold handles,, NEI modified. Reply #2 - Jun 12^th, 2025 at 7:25pm	Print Post
	I have 3 NEI molds, what is the mod? Mike


	IP Logged

oneatatime Frequent Elocutionist Offline Posts: 4031 Location: Rocky Mountains Joined: Oct 30^th, 2011	Re: RCBS mold handles,, NEI modified. Reply #3 - Jun 12^th, 2025 at 7:50pm	Print Post
	Mike, if you look very closely at the photo you can see the little spring loaded pins at the inside ends of the, uh, whatever you call those things. Mounting arms?


	IP Logged

Cbashooter Frequent Elocutionist Offline Posts: 1597 Location: Eastern Wa. Joined: Mar 31^st, 2018	Re: RCBS mold handles,, NEI modified. Reply #4 - Jun 12^th, 2025 at 8:06pm	Print Post
	it pushes the block out at front so they close there first.Then as you close the handles the back closes.


	IP Logged

yamoon Oldtimer Offline NRA Life, ASSRA , GGCA, MCA Posts: 943 Location: Junction City Kansas Joined: Feb 11^th, 2012	Re: RCBS mold handles,, NEI modified. Reply #5 - Jun 12^th, 2025 at 8:25pm	Print Post
	Thanks, I always wear a leather glove and manually close the molds. Mike


	IP Logged

axman Participating Member Offline Posts: 24 Joined: Feb 1^st, 2010	Re: RCBS mold handles,, NEI modified. Reply #6 - Jun 14^th, 2025 at 12:05pm	Print Post
	I cast with a bare left hand. Less fatigue than wearing a glove. Right hand gloved to cut sprue by hand.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 2.0654 seconds.