Page Index Toggle Pages: 1 [2]  Send TopicPrint
Very Hot Topic (More than 25 Replies) Cleaning a 22lr Barrel (Read 2886 times)
boats
Frequent Elocutionist
*****
Offline



Posts: 7626
Location: Virginia
Joined: Apr 23rd, 2004
Re: Cleaning a 22lr Barrel
Reply #15 - Apr 24th, 2025 at 9:54pm
Print Post  
CPA’s or Anschutz always have the opportunity to shoot half a dozen or so before a match .    Confirms nothings bumped the sight, rifles shooting to point of aim. Monthly match morning relay could have 30 degrees difference in temperature from the last mid day finish. It does make a difference in elevation 

Is it seasoning the barrel ? Who knows. I do know it has not been scrubbed hard and is running the same brand of ammo 

Boats
  
Back to top
 
IP Logged
 
j_c_johnson
Full Member
***
Offline


C C Johnson's grandson

Posts: 129
Location: northeast Indiana
Joined: Sep 16th, 2004
Re: Cleaning a 22lr Barrel
Reply #16 - Apr 25th, 2025 at 6:53pm
Print Post  
Al Freeland, a top level smallbore shooter,  used coated Parker Hale rods on his competition .22 Martini. He cleaned it somewhat regularly. He retired the rifle from competition after he documented 460,000 rounds through it with no loss in accuracy. He was worried it would quit on him in the middle of a competition.
  
Back to top
 
IP Logged
 
arlon
Participating Member
*
Offline



Posts: 48
Location: Kerrville Texas
Joined: Mar 29th, 2017
Re: Cleaning a 22lr Barrel
Reply #17 - May 13th, 2025 at 11:37am
Print Post  
J.Francis wrote on Apr 21st, 2025 at 8:26am:
I clean my Anschutz 1413 Free Rifle when it stops shooting. After I clean it, it takes about 30 or 40 rounds before it settles back into being a one holer again. I think it has something to do with having a consistent lube film in the barrel.


I have an older Anschutz 1416 that I got when I was a kid. I shot the heck out of it for a long time then college, work, wife, kids etc had it in the closet for years. I started shooting again and the little Anschutz just did not shoot as well as I thought it should. Not knowing better I pulled a bronze brush through it. When that brush came out, it came out with a cloud of lead dust. I proceeded to pull the brush through the bore a hundred times (from chamber to muzzle with one of those cables made for the purpose). I pulled until there was no more lead dust coming out. Shot it and it was like a different gun. Now I have dozens of .22s many purchased as high milers. First thing I do when I get one is clean the bore with a brush to get any lead build up out. All shoot great. Dirtiest so far was a Martini International Mark IV. An import that had most likely been a club gun. Shot patterns, Cleaned all the old lead out and now It's one of my Schuetzen rifles and the most accurate .22 I own.
  
Back to top
 
IP Logged
 
dcraven
Participating Member
*
Offline



Posts: 10
Joined: May 2nd, 2024
Re: Cleaning a 22lr Barrel
Reply #18 - May 30th, 2025 at 11:44am
Print Post  
I have a 3' long piece of weed eater string with a loop on the end.  I'll run a dry patch thru whichever .22 I'm shooting and call the bore cleaning done.  Leave it bright and shinny, takes 2 seconds, and no chance of wearing on crown or barrel
  
Back to top
 
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7626
Location: Virginia
Joined: Apr 23rd, 2004
Re: Cleaning a 22lr Barrel
Reply #19 - Jun 2nd, 2025 at 6:52am
Print Post  
Pull through’s are effective for a quick wipe after shooting 22’s. Rods best for more aggressive cleaning. Stay behind it aggressive rarely needed. 

I make mine out if monofilament fishing line 30# test mostly. End tie a Bimini Twist for a loop that’s straight in line with the pull.

Can you guys out west can tie a Bimini ?

Boats
  
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 3725
Joined: Mar 9th, 2015
Re: Cleaning a 22lr Barrel
Reply #20 - Jun 2nd, 2025 at 9:54am
Print Post  
Ya know, Boats, the fact is that the Bimini twist, which I attempted to learn fifty years back is of damn little use on a trout stream. If I was wanting to put a rope on an anchor for a boat that I don't own it might be an option. But when hip deep in a cold stream it is a poor choice on two-pound mono and a #18 nymph. Nice Knot though when I figured it would take half an hour to tie, I gave up.
  
Back to top
 
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7626
Location: Virginia
Joined: Apr 23rd, 2004
Re: Cleaning a 22lr Barrel
Reply #21 - Jun 2nd, 2025 at 11:18am
Print Post  
You’re right only need them for certain circumstances, mostly to show off you know how. Big sport fisherman guys hire captains and mates that can rig, owner good at writing checks not running or rigging. 

I use a Bimini to double the running line on surf rods, adding a shock line with a surgeons knot tip to absorb the cast strain. And a to connect a short heavy tip to saltwater fly leaders. 9 & 10 weight rods.

Back to rifles, spray the bore with Balistol put the gun barrel slightly less than level overnight. Pull through with an oversize patch, no need to make room for a rod, next day removes fowling very well.

10 wt fly rod deep sinker line, 20 # leader 40 lb tippet   Black Drum released live. From measurements he weighed 68 lbs 

Boats
  
Back to top
 
IP Logged
 
Grand slam
Senior Forum Member
****
Offline



Posts: 352
Location: Mountains of E. Tennessee
Joined: Jun 7th, 2015
Re: Cleaning a 22lr Barrel
Reply #22 - Jun 2nd, 2025 at 1:28pm
Print Post  
For many years I was a fishing guide in the Florida Keys, used my big toe to tie the Bimini twist…thanks for bringing up the memories.
On my low wall .22rf match rifle that I compete with every other week, I run a loose fitting patch breech first with a a bit of 3 in 1 oil down the bore using a bore guide at the end of the shoot. Before the start of practice I’ll run a dry patch down the bore, again with a bore guide. I don’t want to remove any build up of wax deposits. Occasionally when accuracy drops off (it shoots better than MOA) I’ll use a new nylon brush with Hoppes and short stroke the chamber throat section. At seasons end I’ll clean the bore with a tight patch and Hoppes then tight dry patches until clean then a final patch with a good amount of 3 in 1. Always use a bore guide! I think the throat of a .22rf is almost as important as the crown as far as group size goes.
Good luck Richard
  
Back to top
 
IP Logged
 
beltfed
Frequent Elocutionist
*****
Offline



Posts: 1788
Location: Central Wi
Joined: Dec 20th, 2007
Re: Cleaning a 22lr Barrel
Reply #23 - Jun 16th, 2025 at 9:43pm
Print Post  
grand slam
that 3 in 1 oil has been "accused" over the years as
gradually evaporating, leaving gummy crap behind...
beltfed/arnie
  
Back to top
 
IP Logged
 
.22-5-40
Oldtimer
*****
Offline



Posts: 815
Joined: Feb 13th, 2010
Re: Cleaning a 22lr Barrel
Reply #24 - Jun 20th, 2025 at 6:44pm
Print Post  
Re-reading some of my older books..came across Precision Reloading & Shooting Handbook by Frederick Sinclair and Bill Gravatt.  On page 67, he states  "There is normally a corrosive substance found in the priming material of most rim fire cartridges, so keep those rim fires clean." This was dated 1995.
  
Back to top
 
IP Logged
 
craigster
Oldtimer
*****
Offline



Posts: 736
Location: lost coast CA
Joined: Feb 20th, 2011
Re: Cleaning a 22lr Barrel
Reply #25 - Jun 20th, 2025 at 11:29pm
Print Post  
.22-5-40 wrote on Jun 20th, 2025 at 6:44pm:
Re-reading some of my older books..came across Precision Reloading & Shooting Handbook by Frederick Sinclair and Bill Gravatt.  On page 67, he states  "There is normally a corrosive substance found in the priming material of most rim fire cartridges, so keep those rim fires clean." This was dated 1995.


I believe he is/was misinformed.

(You need to Login or Register to view media files and links)
« Last Edit: Jun 21st, 2025 at 12:32am by craigster »  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2937
Location: Southern NJ
Joined: Aug 1st, 2010
Re: Cleaning a 22lr Barrel
Reply #26 - Jul 6th, 2025 at 10:17pm
Print Post  
bpjack wrote on Apr 20th, 2025 at 3:37pm:
You can always join the "I never clean My 22s" club.
Jack

Absolutely. Never shoot plated bullets and clean only when accuracy starts going away.
  

Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
Back to top
GTalk  
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint