ASSRA Forum - Scope, 32-20 & RRB #2

ASSRA Forum › General › General Discussion › Scope, 32-20 & RRB #2

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

Scope, 32-20 & RRB #2 (Read 2613 times)

stevenjay1 Junior Member Offline Living in the woods! Posts: 58 Location: So NH, But not too close to MA Joined: Mar 15^th, 2015	Scope, 32-20 & RRB #2 Apr 12^th, 2025 at 10:04am	Print Post
	I have a nice #2 RRB in 32-20 Win with a 30” barrel. Unfortunately I have 77 year old eyes. I’m looking for a period correct type scope that won’t break the bank. I’ve looked at the older Weaver 4 and 6 power scopes but I’m not sure if they would if they would work with the 32-20 and I could find mounts for an octagon barrel. I’ve always used open sights so a scope is a new venture. Any suggestions on period type scopes that would work?

	Just another homesick Texan that shouldn't of left in the first place! Tonkin Gulf Yacht Club - 8/69 to 8/71 NRA Life Member CRPA Member
	IP Logged

gnoahhh Frequent Elocutionist Offline Posts: 1017 Location: Gaithersburg, MD Joined: Mar 31^st, 2010	Re: Scope, 32-20 & RRB #2 Reply #1 - Apr 12^th, 2025 at 10:38am	Print Post
	In my opinion something like a Unertl Small Game scope would be ideal, and there's one for sale in our classifieds at the moment.


	IP Logged

bpjack Frequent Elocutionist Offline Posts: 3538 Location: East Olympia, WA Joined: May 18^th, 2008	Re: Scope, 32-20 & RRB #2 Reply #2 - Apr 12^th, 2025 at 11:32am	Print Post
	I found a couple of 4x Wollensac scopes on eBay for just over $100 each. They fit on scope blocks that are similar to Lyman/Unertl ones but use a small hole on the left side for the scope screw. Steve Earle blocks have both the cup cutout on the right and the hole on the left. Mine might be Mossberg as I get the two confused. Frnkeore on this forum is the ‘expert’ on these. Right Frank

	ASSRA # 11318 Experience is something you don't get until just after you need it.
	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 17436 Location: Oregon Joined: Feb 2^nd, 2009	Re: Scope, 32-20 & RRB #2 Reply #3 - Apr 12^th, 2025 at 12:20pm	Print Post
	If you're not against drilling and tapping the barrel I think that's your only option for your #2 to mount a scope. Some guys have successfully epoxied bases to barrels, but I've never tried that. A #2 in .32-20 isn't huge recoil, so it might handle it. I still have decent vision with my 75 year old eyes and use a midrange vernier tang sight, and globe front on my #2 in .32-20. But factory sights were pitiful for any accurate shooting I wanted to do.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Sure shot Frequent Elocutionist Offline Posts: 1086 Location: East central Iowa Joined: Jun 22^nd, 2020	Re: Scope, 32-20 & RRB #2 Reply #4 - Apr 12^th, 2025 at 12:35pm	Print Post
	A Lyman 438 scope would work for you also. There's a couple of them for sale here in the classifieds.


	IP Logged

bpjack Frequent Elocutionist Offline Posts: 3538 Location: East Olympia, WA Joined: May 18^th, 2008	Re: Scope, 32-20 & RRB #2 Reply #5 - Apr 12^th, 2025 at 12:43pm	Print Post
	I tried using epoxy to attach scope blocks to an old Stevens 44 in 25-20 ss. It worked for a while but one eventually one took a slight side hit and came off. The barrel had as nice brown patina except for where the blocks were attached. Jack

	ASSRA # 11318 Experience is something you don't get until just after you need it.
	IP Logged

stevenjay1 Junior Member Offline Living in the woods! Posts: 58 Location: So NH, But not too close to MA Joined: Mar 15^th, 2015	Re: Scope, 32-20 & RRB #2 Reply #6 - Apr 12^th, 2025 at 4:31pm	Print Post
	Thanks for the insight. I have some good options and need to educate myself. I don’t have a problem drilling and tapping the barrel for mounts. I looked at the scopes in the want to sell section. One I really liked but out of my price range, the other could work. Thanks.

	Just another homesick Texan that shouldn't of left in the first place! Tonkin Gulf Yacht Club - 8/69 to 8/71 NRA Life Member CRPA Member
	IP Logged

waterman Frequent Elocutionist Offline Posts: 2934 Location: Behind the Redwood Curtain Joined: Jun 9^th, 2004	Re: Scope, 32-20 & RRB #2 Reply #7 - Apr 15^th, 2025 at 11:32am	Print Post
	Back in 1972, I acquired a Low Wall in .32-20. The previous owner (an old timer I knew) had installed a cheap scope for .22 rimfires on a mount d & t to the side of the barrel. Mount held the scope by clamping it between its 2 halves. Nothing remotely original, but it worked. I replaced the original screws holding the halves together with longer ones and fitted a Lyman Alaskan. Worked great! I now have one heck of a poaching rifle.


	IP Logged

art_ruggiero Frequent Elocutionist Offline Posts: 1189 Location: CT Joined: Dec 14^th, 2008	Re: Scope, 32-20 & RRB #2 Reply #8 - Apr 15^th, 2025 at 12:57pm	Print Post
	get a nice elpaso weaver period look a fine quality at a decent price art


	IP Logged

ndnchf Frequent Elocutionist Offline Posts: 1096 Joined: Mar 6^th, 2014	Re: Scope, 32-20 & RRB #2 Reply #9 - Apr 15^th, 2025 at 4:42pm	Print Post
	I could have written this question myself! I'm in the same boat. I have about 15 #2 RRBs and aging eyes. I've never had a scoped rifle, but have toyed with the idea of adding a scope to one of my #2s. But I know nothing about scopes. I'm watching this discussion closely


	IP Logged

rkba2nd Frequent Elocutionist Offline Posts: 2057 Location: earth Joined: Feb 16^th, 2009	Re: Scope, 32-20 & RRB #2 Reply #10 - Apr 15^th, 2025 at 7:35pm	Print Post
	I have used many scopes on many single shot rifles over the years. My choice overall in your situation for informal target shooting, small game hunting, and just plain fun would be a Lyman Junior Targetspot in 8 or 10 power. On the less expensive side + or - $200 the Lyman 438 is a good choice. Both have Bausch and Lomb lenses and are relatively sturdy. To my eye they look right at home on rifles such as the #2 rolling block.

	rkba2nd
	IP Logged

Liveoak Participating Member Offline Posts: 19 Location: Texas Hill Country Joined: May 4^th, 2019	Re: Scope, 32-20 & RRB #2 Reply #11 - Apr 15^th, 2025 at 10:18pm	Print Post
	My RRB #2 in 32-20 sports a 4X Wollensac as well, and serves my 81 year old eyes very well. The cross hairs are a bit fat but for 50 to 75 yard work they are OK. My scope sits a little high for the original butt stock, however a short section of foam pipe insulation slips on and off the stock as needed to raise the comb.


	IP Logged

Schuetzendave Frequent Elocutionist Offline Retired Ex-Shooter Posts: 4186 Location: St. Albert, Alberta Joined: Jan 28^th, 2005	Re: Scope, 32-20 & RRB #2 Reply #12 - Apr 15^th, 2025 at 11:35pm	Print Post
	I used a Lyman Targetspot scope on my Rolling Block. Installed taller Unertl scope blocks on the barrel to mount the scope to provide more space for loading the action.


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.2782 seconds.