ASSRA Forum › General › Reloading the Single Shot Rifle › 38-55 schuetzen barrel twist
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) 38-55 schuetzen barrel twist (Read 2103 times)
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2509
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: 38-55 schuetzen barrel twist
Reply #15 - Feb 28th, 2025 at 11:49am
Print Post  
marlinguy wrote on Feb 28th, 2025 at 11:08am:
I've wondered why anyone ordered a rifle chambered in the .38-50 Remington today? Is it simply because the .30-40 Krag and .303 British brass is so common and cheap to buy?


Val I've found Krag brass easy enough if you are patient.  I have a lifetime supply which took a few months to find.  It's pretty easy to fit 8-10gr more Swiss 1.5 into the 38-50 case over the 38-55, if it's based on the 30-40 case instead of the shorter  303 Brit brass.

Chris.
 
  
Back to top
 
IP Logged
 
RSW
Frequent Elocutionist
*****
Offline



Posts: 1269
Location: Arizona
Joined: Sep 8th, 2006
Re: 38-55 schuetzen barrel twist
Reply #16 - Feb 28th, 2025 at 11:54am
Print Post  
marlinguy
My understanding the is that BPCR silhouette shooters like the .38-50 Rem-Hep because it has more case capacity than the .38-55. A heavier bullet can be launched at greater velocity than the .38-55 plus it has better knock-down power on the Rams.
Being made from .30-40 and/or .303 brass it an additional plus.
I have a VERY heavy BR rifle with a .38-50 chamber that is every bit as accurate as any .38-55 I've ever come across shooting black and duplex loads. Smiley
  
Randy W
ASSRA 10211  -  ISSA 125
There are indeed two Americas. Simply put, it is not the haves and have nots. The two Americans are in reality divided into those who do and those who don't.
Back to top
GTalk  
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 17434
Location: Oregon
Joined: Feb 2nd, 2009
Re: 38-55 schuetzen barrel twist
Reply #17 - Feb 28th, 2025 at 5:36pm
Print Post  
RSW wrote on Feb 28th, 2025 at 11:54am:
marlinguy
My understanding the is that BPCR silhouette shooters like the .38-50 Rem-Hep because it has more case capacity than the .38-55. A heavier bullet can be launched at greater velocity than the .38-55 plus it has better knock-down power on the Rams.
Being made from .30-40 and/or .303 brass it an additional plus.
I have a VERY heavy BR rifle with a .38-50 chamber that is every bit as accurate as any .38-55 I've ever come across shooting black and duplex loads. Smiley


Thanks Randy. 
With smokeless powders I wouldn't have thought the extra case capacity would matter.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.7691 seconds.