ASSRA Forum - Neck turning 38-50 Remington Hepburn brass

ASSRA Forum › General › Reloading the Single Shot Rifle › Neck turning 38-50 Remington Hepburn brass

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Neck turning 38-50 Remington Hepburn brass (Read 488 times)

gunlaker Frequent Elocutionist Offline Posts: 2383 Location: lower mainland, B.C. Joined: Dec 13^th, 2010	Neck turning 38-50 Remington Hepburn brass Dec 29^th, 2024 at 12:29pm	Print Post
	What outside neck turning setups do you like? I have a bunch of 38-50 Remington Hepburn brass I want to neck turn. I have an rcbs hand held neck turner, but I don't see any .375" pilots available for it. What are you guys using? Thanks, Chris.


	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1789 Location: Central Wi Joined: Dec 20^th, 2007	Re: Neck turning 38-50 Remington Hepburn brass Reply #1 - Dec 29^th, 2024 at 12:41pm	Print Post
	i had a friend turn a 0.375 pilot for my lyman Universal trimmer with powered shaft for outside neck turning my 38-50 brass Simple starting with a 3/8 drill rod.


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16885 Location: Oregon Joined: Feb 2^nd, 2009	Re: Neck turning 38-50 Remington Hepburn brass Reply #2 - Dec 29^th, 2024 at 1:02pm	Print Post
	I've used my K&M neck turning tool for a couple decades and like it. Kits are expensive, but the tools and a mandrel are pretty reasonably priced. $36 to $46. (You need to *Login* or *Register* to view media files and links)

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

gunlaker Frequent Elocutionist Offline Posts: 2383 Location: lower mainland, B.C. Joined: Dec 13^th, 2010	Re: Neck turning 38-50 Remington Hepburn brass Reply #3 - Dec 30^th, 2024 at 8:50am	Print Post
	Thanks! Chris.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.1746 seconds.