ASSRA Forum › General › General Discussion › Unknown chambering
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Unknown chambering (Read 429 times)
condorsc
Full Member
***
Offline


NRA Life/Benefactor, ASSRA,
SCV Life

Posts: 157
Location: Beaufort, S.C.
Joined: Nov 13th, 2021
Unknown chambering
Dec 2nd, 2024 at 12:35am
Print Post  
I have a RB target rifle I would much appreciate a reasonably accurate guess on the chambering. The barrel is new, eight lands and grooves. The chamber cast shows a case that is pretty close to a 38-40, but the bore is smaller than the app. .40 caliber of the 38-40. The eight lands and grooves are app. .349 and .356. Of course, much smaller than 38-40. Comments?
  
Back to top
 
IP Logged
 
jimmy
Senior Forum Member
****
Offline


Now available in Oklahoma.

Posts: 299
Location: Skiatook
Joined: May 12th, 2009
Re: Unknown chambering
Reply #1 - Dec 2nd, 2024 at 11:34am
Print Post  
357 Bain Davis or a 44 mag necked down to 38?
  
Back to top
 
IP Logged
 
Cat_Whisperer
Frequent Elocutionist
*****
Offline


No 1, 9.3x74R

Posts: 3889
Location: Mountains of Virginia
Joined: Apr 17th, 2004
Re: Unknown chambering
Reply #2 - Dec 2nd, 2024 at 11:40am
Print Post  
condorsc wrote on Dec 2nd, 2024 at 12:35am:
I have a RB target rifle I would much appreciate a reasonably accurate guess on the chambering. The barrel is new, eight lands and grooves. The chamber cast shows a case that is pretty close to a 38-40, but the bore is smaller than the app. .40 caliber of the 38-40. The eight lands and grooves are app. .349 and .356. Of course, much smaller than 38-40. Comments?


dimensions from the chamber cast would be helpful.
  
Cat Whisperer (trk)
Chief of Smoke
Pulaski Coehorn Works and Skunk Works
Drafted May 1970, Retired Maj. U.S.Army
assra #9885
Back to top
WWW  
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16295
Location: Oregon
Joined: Feb 2nd, 2009
Re: Unknown chambering
Reply #3 - Dec 2nd, 2024 at 2:08pm
Print Post  
Have you measured the rim diameter at least? Maybe a .38 Long or .38 Extra Long?
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
condorsc
Full Member
***
Offline


NRA Life/Benefactor, ASSRA,
SCV Life

Posts: 157
Location: Beaufort, S.C.
Joined: Nov 13th, 2021
Re: Unknown chambering
Reply #4 - Dec 6th, 2024 at 2:11pm
Print Post  
Cat_Whisperer wrote on Dec 2nd, 2024 at 11:40am:
[quote author=6B6D6D6F0E323F346B6D62695A0 link=1733117731/0#0 date=1733117731]I have a RB target rifle I would much appreciate a reasonably accurate guess on the chambering. The barrel is new, eight lands and grooves. The chamber cast shows a case that is pretty close to a 38-40, but the bore is smaller than the app. .40 caliber of the 38-40. The eight lands and grooves are app. .349 and .356. Of course, much smaller than 38-40. Comments?


dimensions from the chamber cast would be helpful.[/q

Case OAL           .165

Mid- shoulder     .424.

Rim                  .535

Neck                .393

Break(Beginning of shoulder) .460

Headspace app. 1.32

Bbl. 26-1/4"







  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1251 seconds.