Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 32-40 Highwall splitting about 30% of brass (Read 412 times)
emmett22405
Full Member
***
Offline



Posts: 162
Location: Virginia
Joined: Sep 21st, 2009
32-40 Highwall splitting about 30% of brass
Oct 22nd, 2024 at 4:52pm
Print Post  
Unearthed my wife's HW  and she reminded me that it lay quiet for years because it split cases. Today we shot about 30 cases and some 6 were split-- 6:00 position vertically as case stands along throat and neck of case about 1/2 to 1/2 inch.  Several smiths worked on it some time ago and the last one John King remarked some sort of problem with the chamber that he would fix gratis, but cant recall what the problem was. After about a year it started the splitting and by then Mr King was retired.   Any ideas what the problem he discovered was--or is?? thanks
  
Back to top
 
IP Logged
 
emmett22405
Full Member
***
Offline



Posts: 162
Location: Virginia
Joined: Sep 21st, 2009
Re: 32-40 Highwall splitting about 30% of brass
Reply #1 - Oct 22nd, 2024 at 4:53pm
Print Post  
Sorry 1/4 to 1/2 inch long splits
  
Back to top
 
IP Logged
 
Old Soldier
Senior Forum Member
****
Offline



Posts: 278
Location: North Pole, Alaska
Joined: Oct 17th, 2015
Re: 32-40 Highwall splitting about 30% of brass
Reply #2 - Oct 22nd, 2024 at 6:17pm
Print Post  
Sounds like you chamber is too big to me. How do the un-split cases compare to unfired cases? Are they larger in diameter at the front?
  

"White man have very strong Medicine. Shoot today maybeso kill you tomorrow." Esa-Tai Commanche warrior
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 3865
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: 32-40 Highwall splitting about 30% of brass
Reply #3 - Oct 22nd, 2024 at 7:34pm
Print Post  
I trust that the fired cases that didn't split will not be full length resized and the necks only partially sized if at all.
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1570
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: 32-40 Highwall splitting about 30% of brass
Reply #4 - Oct 22nd, 2024 at 8:03pm
Print Post  
could it be a 32-40 Remington chamber?
  
Back to top
 
IP Logged
 
beltfed
Frequent Elocutionist
*****
Offline



Posts: 1752
Location: Central Wi
Joined: Dec 20th, 2007
Re: 32-40 Highwall splitting about 30% of brass
Reply #5 - Oct 23rd, 2024 at 9:19am
Print Post  
Definitely needs to do a chamber cast
and measure carefully to verify its chambering
beltfed/arnie
  
Back to top
 
IP Logged
 
emmett22405
Full Member
***
Offline



Posts: 162
Location: Virginia
Joined: Sep 21st, 2009
Re: 32-40 Highwall splitting about 30% of brass
Reply #6 - Oct 23rd, 2024 at 8:26pm
Print Post  
split vs unsplit seem identical; Max accuracy requires full length resize; no it is the Winchester 32-40 chambering

Today splits dropped to 1/2 yesterdays %. There was some sort of issue regarding the chambering error and i simply cant recall what it was. Perhaps John Taylor can weigh in I wiil seek private email thanks
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11461
Location: Why, out West of course
Joined: May 29th, 2006
Re: 32-40 Highwall splitting about 30% of brass
Reply #7 - Oct 23rd, 2024 at 9:05pm
Print Post  
emmett22405 wrote on Oct 23rd, 2024 at 8:26pm:
split vs unsplit seem identical; Max accuracy requires full length resize; no it is the Winchester 32-40 chambering

Today splits dropped to 1/2 yesterdays %. There was some sort of issue regarding the chambering error and i simply cant recall what it was. Perhaps John Taylor can weigh in I wiil seek private email thanks


You mentioned John King in your opening post. If your chamber was done by John Taylor you might get information from bpjack about his 32-40 JT chamber. As I remember it was not standard. Jack may still have the barrel.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1047
Joined: Mar 6th, 2014
Re: 32-40 Highwall splitting about 30% of brass
Reply #8 - Oct 24th, 2024 at 7:17am
Print Post  
Maybe the brass simply needs to be annealed.
  
Back to top
 
IP Logged
 
emmett22405
Full Member
***
Offline



Posts: 162
Location: Virginia
Joined: Sep 21st, 2009
Re: 32-40 Highwall splitting about 30% of brass
Reply #9 - Oct 24th, 2024 at 3:54pm
Print Post  
It is a modern Al Story 32/40 barrel. So I know the chambering is 32-40.  it was profiled and installed and chambered  --believe by Al Story and a new HW breech block made by his bud who I think was named Lewis  as he wrote at least one article about Al's barrels; it was sent to another smith who did nothing for over a year  and finally for finish work and fixing the single set trigger to John King who discovered an error in the chambering that so upset him he called me and fixed it gratis. John Taylor has yet to see this puppy.  It is about "splicing"? part of the chamber
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint