ASSRA Forum › General › Reloading the Single Shot Rifle › 8x43 caliber low wall
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 8x43 caliber low wall (Read 455 times)
rondeak
Newbie
*
Offline



Posts: 3
Location: Catskill New York, Tampa Flori
Joined: Aug 15th, 2022
8x43 caliber low wall
Oct 20th, 2024 at 8:22pm
Print Post  
Good evening folks, I recently picked up a beautiful little shoots and stocked low wall with the barrel marked 8x43. Have any of you run into this caliber before? Bore diameter is approximately 0.31 and I will be doing my first ever chamber cast shortly. Any thoughts?
  
Back to top
 
IP Logged
 
rondeak
Newbie
*
Offline



Posts: 3
Location: Catskill New York, Tampa Flori
Joined: Aug 15th, 2022
Re: 8x43 caliber low wall
Reply #1 - Oct 20th, 2024 at 8:27pm
Print Post  
Sorry, schutzen
  
Back to top
 
IP Logged
 
yamoon
Oldtimer
*****
Offline


NRA Life, ASSRA , GGCA,
MCA

Posts: 880
Location: Junction City Kansas
Joined: Feb 11th, 2012
Re: 8x43 caliber low wall
Reply #2 - Oct 20th, 2024 at 9:33pm
Print Post  
Babyotto 8x43r. Found a reference on the international cartridge Collector forum.
Mike
  
Back to top
 
IP Logged
 
bpjack
Frequent Elocutionist
*****
Offline



Posts: 2757
Location: East Olympia, WA
Joined: May 18th, 2008
Re: 8x43 caliber low wall
Reply #3 - Oct 20th, 2024 at 11:11pm
Print Post  
(You need to Login or Register to view media files and links)
  
ASSRA # 11318
just a bit of a hoot.
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16091
Location: Oregon
Joined: Feb 2nd, 2009
Re: 8x43 caliber low wall
Reply #4 - Oct 21st, 2024 at 1:41pm
Print Post  
Does this 1885 happen to have European, or British proof marks on the barrel?
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
25cal
Participating Member
*
Offline



Posts: 41
Joined: Nov 27th, 2009
Re: 8x43 caliber low wall
Reply #5 - Oct 21st, 2024 at 6:12pm
Print Post  
Anyone else see shot in the see through plastic shell? Me thinks a chamber cast as mentioned is in order-especially the first inch or two of the bore.
  
Back to top
 
IP Logged
 
jhm
Frequent Elocutionist
*****
Offline



Posts: 1453
Location: georgia
Joined: Sep 4th, 2011
Re: 8x43 caliber low wall
Reply #6 - Oct 21st, 2024 at 6:29pm
Print Post  
It's does seem to have shot in it. Could it be a little smooth bore?



JMH
  
Back to top
 
IP Logged
 
SchwarzStock
Frequent Elocutionist
*****
Offline



Posts: 1161
Location: SchwarzWald
Joined: Mar 23rd, 2010
Re: 8x43 caliber low wall
Reply #7 - Oct 23rd, 2024 at 8:44am
Print Post  
Could it be?

  
If your rifle is not in 7.62 and you can't hit what you are aiming at with de-linked machinegun ammo you are a pretender.
Back to top
 
IP Logged
 
rondeak
Newbie
*
Offline



Posts: 3
Location: Catskill New York, Tampa Flori
Joined: Aug 15th, 2022
Re: 8x43 caliber low wall
Reply #8 - Oct 24th, 2024 at 3:46pm
Print Post  
Thanks a lot for the replies. It does not have any proof marks on the barrel . Just the gun makers name h. C. L u f t. 
I did a chamber cast and it has the same rim diameter as a 32- 20 at .408
It is a straight taper approximately 1.7 inches long. Groove diameter is .321
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.7244 seconds.