Page Index Toggle Pages: 1 2 3 [4]  Send TopicPrint
Very Hot Topic (More than 25 Replies) Finally found a nice .32-40 highwall (Read 1782 times)
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2271
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Finally found a nice .32-40 highwall
Reply #45 - Oct 25th, 2024 at 9:40am
Print Post  
ndnchf wrote on Oct 25th, 2024 at 5:33am:
I'm looking at the MVA Winchester style windage globe sight. In the option pull down it offers the choice of #117 or #118 style. 

(You need to Login or Register to view media files and links)

I've read the description a couple times. Maybe I'm half blind, but I find no explanation of the difference between the two. Can anyone explain it?

Thanks
Steve


I think one has a spirit level and one doesn't but I could be wrong.  I tried to add them to the cart to compare the prices but I am getting malware alerts.

Chris.
  
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1307
Location: Indiana
Joined: Feb 19th, 2020
Re: Finally found a nice .32-40 highwall
Reply #46 - Oct 25th, 2024 at 9:48am
Print Post  
The 117 sight has a plain insert clip; the 118 has a spirit level clip.

Bill Lawrence
  
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1047
Joined: Mar 6th, 2014
Re: Finally found a nice .32-40 highwall
Reply #47 - Oct 25th, 2024 at 5:25pm
Print Post  
There is a notable price difference between 117 and 118. So maybe the latter includes a spirit level.
  
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1047
Joined: Mar 6th, 2014
Re: Finally found a nice .32-40 highwall
Reply #48 - Oct 25th, 2024 at 5:34pm
Print Post  
Perhaps a plain globe sight would be sufficient. I dont expect to shoot beyond 200 yards. Once windage is set, it should be good for most conditions.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16086
Location: Oregon
Joined: Feb 2nd, 2009
Re: Finally found a nice .32-40 highwall
Reply #49 - Oct 26th, 2024 at 10:27am
Print Post  
If most of your shooting is 200 yds. or less you can use a simple globe without windage. If it gets windy you'll spend more time chasing wind trying to readjust anyway.
But for longer distances a Soule tang sight, or windage globe are a real asset. Sometimes need both if it gets really windy! Especially with lighter bullets like the .32-40 uses! Our last shoot I was getting 3 ft. of wind drift shooting my .32-40 Schoyen Ballard at 400 yds. Farther than 400 yds. was impossible to get on target that day.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1047
Joined: Mar 6th, 2014
Re: Finally found a nice .32-40 highwall
Reply #50 - Oct 26th, 2024 at 4:01pm
Print Post  
I think you may be right. 200 yards is the longest range at my club. I doubt I could see targets much beyond that anyway. If I were to shoot at a longer range I'd use either my .40-70 bn Shiloh m1874 or .44-77 Remington #1 sporting rifle. Both have good sights.
  
Back to top
 
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7545
Location: Virginia
Joined: Apr 23rd, 2004
Re: Finally found a nice .32-40 highwall
Reply #51 - Oct 26th, 2024 at 4:57pm
Print Post  
I’m fussy about looking right. That Highwall would look perfect with a 17A Lyman they were produced about the same period the gun was used if not built. Expensive windage & level globe front sort of needs a full target Tang sight to look right . As a pair adding a Hadley disk you’re into nearly a thousand dollars.  I have two CPA’s set up that way. 


Match shooting it’s worth it, otherwise I prefer close to original and it’s such a nice original tang sight on the gun. It’s possible to buy Vintage 17A’s that would have the right Patina too. . My vintage Marlin leaver actions all have Lyman’s 


Opinion worth what it cost ! 

Boats
  
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1047
Joined: Mar 6th, 2014
Re: Finally found a nice .32-40 highwall
Reply #52 - Oct 26th, 2024 at 5:57pm
Print Post  
bpjack wrote on Oct 24th, 2024 at 1:04pm:
I have this accurate mould.
(You need to Login or Register to view media files and links)
If you want to try a tapered bullet that probably won't work in fixed ammo since it will just fall inside with its smaller forward bands, I have 41 cast in 20-1 and 6 in 30-1 all lubed with Javelina lube I can send you free of charge.  Juat PM me your address and I will send them.

Jack


The bullets just arrived  Smiley  Unfortunately the foam that held them upright had been jarred loose, and the bullets mixed up. So no way to tell the 20-1 from the 30-1. But no matter, they will be great to try breech seating with. Thanks again very much!   

The vernier sight is on its way to Tony Maddox for a new spring. This will give me time to get ready to try these  Smiley

Steve
  
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1047
Joined: Mar 6th, 2014
Re: Finally found a nice .32-40 highwall
Reply #53 - Oct 26th, 2024 at 6:00pm
Print Post  
boats wrote on Oct 26th, 2024 at 4:57pm:
I’m fussy about looking right. That Highwall would look perfect with a 17A Lyman they were produced about the same period the gun was used if not built. Expensive windage & level globe front sort of needs a full target Tang sight to look right . As a pair adding a Hadley disk you’re into nearly a thousand dollars.  I have two CPA’s set up that way. 


Match shooting it’s worth it, otherwise I prefer close to original and it’s such a nice original tang sight on the gun. It’s possible to buy Vintage 17A’s that would have the right Patina too. . My vintage Marlin leaver actions all have Lyman’s 


Opinion worth what it cost ! 

Boats


I definately want it to look right. I already have a 17A on a #2 roller. Its a good, reasonably priced sight. I will look for a low profile version. I can age the finish to blend with the rifle. Thanks Boats!
  
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2271
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Finally found a nice .32-40 highwall
Reply #54 - Oct 26th, 2024 at 6:01pm
Print Post  
Steve, you should see a weight difference between the two alloys so if you run them over a scale they should sort themselves into two groups.

Chris.
  
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1047
Joined: Mar 6th, 2014
Re: Finally found a nice .32-40 highwall
Reply #55 - Oct 26th, 2024 at 6:28pm
Print Post  
Good point Chris. They are already lubed, so that may cause a little more variation. But I'll give it a try.
  
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1047
Joined: Mar 6th, 2014
Re: Finally found a nice .32-40 highwall
Reply #56 - Oct 27th, 2024 at 10:09am
Print Post  
Sunday morning project - make an adjustable plugged case. I just winged it. A bit crude, but I think it will work.

  
Back to top
 
IP Logged
 
bpjack
Frequent Elocutionist
*****
Offline



Posts: 2757
Location: East Olympia, WA
Joined: May 18th, 2008
Re: Finally found a nice .32-40 highwall
Reply #57 - Oct 27th, 2024 at 1:25pm
Print Post  
Looks good to me.  Have fun testing. 

Jack
  

ASSRA # 11318
just a bit of a hoot.
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1047
Joined: Mar 6th, 2014
Re: Finally found a nice .32-40 highwall
Reply #58 - Oct 27th, 2024 at 3:25pm
Print Post  
I slugged the bore. Groove diameter came in at .3201". 

I measured the front sight height and compared it to the currently available Lyman 17A heights. I was using a 6 O'clock hold on the bull with the current Lyman #4. So with the 17A aperature, the .404" height will be pretty close when centered. So I just ordered one  Smiley
  
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2271
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Finally found a nice .32-40 highwall
Reply #59 - Oct 28th, 2024 at 9:44am
Print Post  
That adjustable case will work just fine as long as your bullet is a reasonably close fit to the throat.  I have made a few like that.  Rather than pushing them in with my thumb, I use a Klein nut driver as its easier on the thumbs.

Chris.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 2 3 [4] 
Send TopicPrint