ASSRA Forum › General › Reloading the Single Shot Rifle › 22 cal - alloy for accuracy
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 22 cal - alloy for accuracy (Read 370 times)
Cat_Whisperer
Frequent Elocutionist
*****
Offline


No 1, 9.3x74R

Posts: 3877
Location: Mountains of Virginia
Joined: Apr 17th, 2004
22 cal - alloy for accuracy
Oct 4th, 2024 at 7:25pm
Print Post  
I'm loading for 22 Hornet, 22-KHornet, 221, 223.  Don't need expansion nor high velocities, looking for accuracy.  I have one pot for 1:20 and another for a ww/lead/tin mix.  Considering a 3rd pot for linotype.
.
SO, recommendations for a place to start.
  
Cat Whisperer (trk)
Chief of Smoke
Pulaski Coehorn Works and Skunk Works
Drafted May 1970, Retired Maj. U.S.Army
assra #9885
Back to top
WWW  
IP Logged
 
gnoahhh
Oldtimer
*****
Offline



Posts: 807
Location: Gaithersburg, MD
Joined: Mar 31st, 2010
Re: 22 cal - alloy for accuracy
Reply #1 - Oct 5th, 2024 at 6:40am
Print Post  
Depends on velocity and whether it's gas checked or not. Hornets for plain base plinkers at .22LR velocity I use 1:20 or 1:30. 1600-2000fps with GC's I use 1:10 or WW's+tin. Casting/sizing to throat diameter is pretty critical. Just what I do.
  
Back to top
 
IP Logged
 
GunBum
Full Member
***
Offline



Posts: 187
Location: SW Missouri
Joined: Oct 30th, 2021
Re: 22 cal - alloy for accuracy
Reply #2 - Oct 5th, 2024 at 8:50am
Print Post  
One option to consider is powder coating the bullets.  I’ve had good luck with garbage range scrap lead bullets that I’ve powder coated and then sized to the appropriate size for the bore.  No leading because of the powder coat and good bore seal from proper sizing.  I just put a teaspoon or so of the powder coating powder in a plastic container with about 50 cast bullets.  Then shake them around, take them out, and put them in an old toaster oven to cure the powder coating.  After that I size, load, and shoot.  Almost all of my .22 and .30 caliber rifles and single shot pistols that I used the fret about shooting cast bullets are now getting powder coat jackets.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16091
Location: Oregon
Joined: Feb 2nd, 2009
Re: 22 cal - alloy for accuracy
Reply #3 - Oct 5th, 2024 at 11:29am
Print Post  
I load for my 1893 Marlin in .25-36 M cartridge. My bullets I cast are 115 grain and I cast them hard at 1:14 mix. Load them to around 1800 fps with no gas checks and they shoot well and don't lead my bore. I've used these loads out to 500 yd. dingers and very accurate.
I'd go gas checked and softer 1:20 if I was using the loads for hunting.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 3865
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: 22 cal - alloy for accuracy
Reply #4 - Oct 5th, 2024 at 12:16pm
Print Post  
I had a supply of linotype and used it for my K-Hornet just because I had no other use for it. Worked fine.
  
Back to top
 
IP Logged
 
Mal
Full Member
***
Offline



Posts: 220
Location: Adelaide SOUTH AUSTRALIA
Joined: Dec 5th, 2012
Re: 22 cal - alloy for accuracy
Reply #5 - Oct 5th, 2024 at 5:54pm
Print Post  
I use Depleted Lino for everything except my 40/65 REM. Roller, scrap printers Lino ,about 20 BN. .22, 303,308, 357, 45 auto 38 spec. .32 SW long. All shot very well. Alox lube in all cals. Mal in au.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16091
Location: Oregon
Joined: Feb 2nd, 2009
Re: 22 cal - alloy for accuracy
Reply #6 - Oct 5th, 2024 at 6:10pm
Print Post  
Linotype has a Brinell hardness of around 22, and mixed 50/50 with pure lead makes good hunting bullets at Brinell 11 hardness.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.4138 seconds.