ASSRA Forum › General › Reloading the Single Shot Rifle › RCBS vs. Redding
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic RCBS vs. Redding (Read 298 times)
.22-5-40
Oldtimer
*****
Offline



Posts: 797
Joined: Feb 13th, 2010
RCBS vs. Redding
Oct 1st, 2024 at 7:30am
Print Post  
Has anyone experienced any difference between RCBS and Redding sizing dies..(except for cost!) as far as excerss sizing of brass?  I know these mfg. set their dies up for jacketed but does one brand tend to size smaller?  Thanks.
  
Back to top
 
IP Logged
 
Old-Win
Frequent Elocutionist
*****
Offline



Posts: 1670
Location: Minnesota
Joined: Nov 24th, 2005
Re: RCBS vs. Redding
Reply #1 - Oct 1st, 2024 at 8:38am
Print Post  
I felt that my Redding dies sized the necks of my cases more than necessary. I sent a set back to the factory but they came back with a .note that they were in spec. They seemed to overwork the brass.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16091
Location: Oregon
Joined: Feb 2nd, 2009
Re: RCBS vs. Redding
Reply #2 - Oct 1st, 2024 at 7:59pm
Print Post  
I only full length size my brass when I first get new brass, so it's never been an issue with any brand of dies. And even new brass I don't size if I check it and it drops in the chamber easily. 
I also don't put much neck tension on my crimp to avoid working the case mouths too much.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Skalkaho
Oldtimer
*****
Offline



Posts: 785
Location: Montana
Joined: Sep 29th, 2006
Re: RCBS vs. Redding
Reply #3 - Oct 2nd, 2024 at 11:45am
Print Post  
The RCBS Cowboy Dies were sure a nice set !
  
May the Bullet Gods be with you.......
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.3314 seconds.