ASSRA Forum - Where to order custom mold

ASSRA Forum › General › For Sale/Trade › Where to order custom mold

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

Hot Topic (More than 10 Replies)

Where to order custom mold (Read 1173 times)

Dales Senior Forum Member Offline Posts: 311 Location: Western NY Joined: Oct 21^st, 2013	Where to order custom mold Sep 12^th, 2024 at 10:14pm	Print Post
	Need a heavy 32 cal spitzer bullet mold Who is making custom molds Thanks for any ideas Dale


	IP Logged

Oleblacksmith Newbie Online Posts: 0 Joined: Jan 10^th, 2024	Re: Where to order custom mold Reply #1 - Sep 12^th, 2024 at 10:23pm	Print Post
	Steve Brooks molds are awesome.


	IP Logged

Cbashooter Frequent Elocutionist Offline Posts: 1567 Location: Eastern Wa. Joined: Mar 31^st, 2018	Re: Where to order custom mold Reply #2 - Sep 12^th, 2024 at 10:49pm	Print Post
	accuratemolds.com even with the new ownership has done good work for me.They are limited to a small meplat so a true point isn't an.option.They have a big catalog and often a design is pretty close and you can tweak the dimensions


	IP Logged

toppkatt Participating Member Offline Posts: 38 Joined: Feb 7^th, 2020	Re: Where to order custom mold Reply #3 - Sep 12^th, 2024 at 10:52pm	Print Post
	Second Steve Brooks. I have two of his molds and they are great.


	IP Logged

frnkeore Frequent Elocutionist Online Posts: 7255 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: Where to order custom mold Reply #4 - Sep 13^th, 2024 at 2:36am	Print Post
	NOE has these molds in stock. They are exact copies of the PJ molds, that I designed, using actual PJ bullets out of his molds. The 217 gr is the bullet for 14 twist and the 234 gr is for 11 - 12 twist. (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links)

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

critter68 Senior Forum Member ASSRA Board Member Offline Posts: 267 Location: Wisconsin Joined: May 31^st, 2018	Re: Where to order custom mold Reply #5 - Sep 13^th, 2024 at 7:51am	Print Post
	Steve Brooks Mike

	ASSRA LIFE#294 NRA LIFE #194353342
	IP Logged

Myers Senior Forum Member Offline Posts: 376 Joined: Mar 5^th, 2013	Re: Where to order custom mold Reply #6 - Sep 13^th, 2024 at 1:03pm	Print Post
	frnkeore wrote on Sep 13^th, 2024 at 2:36am: NOE has these molds in stock. They are exact copies of the PJ molds, that I designed, using actual PJ bullets out of his molds. The 217 gr is the bullet for 14 twist and the 234 gr is for 1 (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) I have found that the NOE copy of the Jones does not shoot nearly as good as the original.


	IP Logged

frnkeore Frequent Elocutionist Online Posts: 7255 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: Where to order custom mold Reply #7 - Sep 13^th, 2024 at 2:10pm	Print Post
	Myers wrote on Sep 13^th, 2024 at 1:03pm: frnkeore wrote on Sep 13^th, 2024 at 2:36am: NOE has these molds in stock. They are exact copies of the PJ molds, that I designed, using actual PJ bullets out of his molds. The 217 gr is the bullet for 14 twist and the 234 gr is for 1 (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) I have found that the NOE copy of the Jones does not shoot nearly as good as the original. Did the original that you shot have the same dimensions as the NOE drawing? Did you measure the bullet from the NOE mold and compare it to the drawing? If so, was there any differences and was it cast from a aluminum or brass mold? If the dimensions and weight are the same, I can see no reason that they could shoot any different. The 234 gr bullet that I copied was from Dave Pattersons, PJ mold, shot in a 11.5 twist RKS barrel. We've all seen how well his rifle shoots with that bullet. Regarding Steve Brooks molds, he will not guaranty that he can make a mold to any particular dimensions, he tried to do one for me and was off by quite a bit, in important areas of the design. If you ask him, he will only say it will be "close". Since the passing of PJ, there are no custom mold makers that can make accurate copy of a drawing or mold on a 1 of 1 bases, that I am aware of.

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

JimHs1 Newbie Offline Posts: 0 Joined: Oct 15^th, 2021	Re: Where to order custom mold Reply #8 - Sep 13^th, 2024 at 2:41pm	Print Post
	David Mos I have one of his. 32 caliber 217 grain.


	IP Logged

Dales Senior Forum Member Offline Posts: 311 Location: Western NY Joined: Oct 21^st, 2013	Re: Where to order custom mold Reply #9 - Sep 13^th, 2024 at 2:57pm	Print Post
	Thanks for your responses I contacted David Mos but he said he is not taking any orders I have the 230 grain NOE mold but have trouble maintaining constant wt with the aluminum mold I had forgot about Steve Brooks he made me a very good 338 mold a few years ago so I ordered a new mold from him today Dale


	IP Logged

bpjack Frequent Elocutionist Online Posts: 2709 Location: East Olympia, WA Joined: May 18^th, 2008	Re: Where to order custom mold Reply #10 - Sep 13^th, 2024 at 2:58pm	Print Post
	I have a Hoch version of this Mos mould and it shoots extremely well in my 14 twist high wall. It may not be as heavy as you are seeking though. (You need to *Login* or *Register* to view media files and links) Jack

	ASSRA # 11318 just a bit of a hoot.
	IP Logged

Hornetb Newbie Offline Posts: 9 Joined: Mar 24^th, 2015	Re: Where to order custom mold Reply #11 - Sep 14^th, 2024 at 10:29pm	Print Post
	Are these molds more suited to breech seating, or fixed? Particularly the NOE ones linked above. Thanks
	« Last Edit: Sep 14^th, 2024 at 11:46pm by Hornetb »

	IP Logged

bpjack Frequent Elocutionist Online Posts: 2709 Location: East Olympia, WA Joined: May 18^th, 2008	Re: Where to order custom mold Reply #12 - Sep 14^th, 2024 at 10:52pm	Print Post
	The CPA one is pretty much limited to breech seating due to its taper.

	ASSRA # 11318 just a bit of a hoot.
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1630 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: Where to order custom mold Reply #13 - Sep 15^th, 2024 at 5:47am	Print Post
	frnkeore wrote on Sep 13^th, 2024 at 2:36am: NOE has these molds in stock. They are exact copies of the PJ molds, that I designed, using actual PJ bullets out of his molds. The 217 gr is the bullet for 14 twist and the 234 gr is for 11 - 12 twist. (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) The 234gr shoots very well in my 11.5 twist RKS barrel and the 217 works well in a 14 twist Kreiger. The issue I have with NOE moulds is I can't get them to cast without whiskers on the bullets. The vent lines are too big in my opinion. I got tired of removing the whiskers so I had Brooks make one for me. No issues. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

bpjack Frequent Elocutionist Online Posts: 2709 Location: East Olympia, WA Joined: May 18^th, 2008	Re: Where to order custom mold Reply #14 - Sep 15^th, 2024 at 11:23am	Print Post
	My (heavy) single cavity brass NOE 217 gr mold from Frank’s design had no issues casting bullets. I shoots well but not as consistent as my Hoch 208 gr Borton-Darr designed 3 groove spitzer in my 14 twist GM barreled high wall. Jack

	ASSRA # 11318 just a bit of a hoot.
	IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.4083 seconds.