ASSRA Forum - 44-77 or .43 Spanish brass wanted

ASSRA Forum › General › For Sale/Trade › 44-77 or .43 Spanish brass wanted

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

44-77 or .43 Spanish brass wanted (Read 620 times)

rollingblock Senior Forum Member Offline Posts: 386 Location: Texas part of New Mexico Joined: Aug 19^th, 2012	44-77 or .43 Spanish brass wanted Sep 8^th, 2024 at 2:55pm	Print Post
	Looking for 44-77 Sharps brass with the “.085 rim thickness for an original Remington sporting rifle, or .43 Spanish with the thicker rim. Also looking for a die set for the 44-77 (and please no “Capt. Obvious” replies), no one has them in stock and I don’t want to wait 8 months or longer. For now I’ll use my .43 Spanish die set with a .446 expander. Thank’s in advance - John
	« Last Edit: Today* at 11:30am by rollingblock* »

	IP Logged

Oleblacksmith Newbie Offline Posts: 0 Joined: Jan 10^th, 2024	Re: 44-77 brass wanted Reply #1 - Sep 8^th, 2024 at 5:24pm	Print Post
	Check out Rocky Mountain Cartridge Co. Since I'm a Newbie I can't post their website.


	IP Logged

.22-5-40 Oldtimer Offline Posts: 794 Joined: Feb 13^th, 2010	Re: 44-77 brass wanted Reply #2 - Sep 8^th, 2024 at 7:41pm	Print Post
	Track Of The Wolf has .43 Spanish...it fit my original .44-77 Sharps. Rim is .087".
	« Last Edit: Sep 8^th, 2024 at 7:55pm by .22-5-40 »

	IP Logged

TN Longhunter Participating Member Offline Posts: 13 Location: Tennessee Joined: Jan 15^th, 2014	Re: 44-77 brass wanted Reply #3 - Sep 8^th, 2024 at 8:09pm	Print Post
	Track of the Wolf as stated ($4 per case).Plus, just keep this thread going. I was in the same boat last year after going 44/77 free to three rollers and one Sharps in it. It is out there, just keep posting to different groups.


	IP Logged

Ranch13 Oldtimer Offline Posts: 545 Location: East Central Wy. Joined: Jan 20^th, 2018	Re: 44-77 brass wanted Reply #4 - Sep 9^th, 2024 at 11:27am	Print Post
	Check the Buffalo Arms website to see what they might have on hand, and place a back order if they're out. As far as dies go I've been using lee 43 mauser dies for the 44-77 for over a decade with good results. You will need a compression die if you load black powder. Rocky Mountain Cartridge in Worland Wy does a good job with 44-77 brass .


	IP Logged

TN Longhunter Participating Member Offline Posts: 13 Location: Tennessee Joined: Jan 15^th, 2014	Re: 44-77 brass wanted Reply #5 - Sep 11^th, 2024 at 9:36am	Print Post
	No “Cap Obvious “ answer but I call C&H about a set on backorder and they stated they were in the system and waiting for them to get back from heat treat. Said 8-10 weeks, I should have them.


	IP Logged

rollingblock Senior Forum Member Offline Posts: 386 Location: Texas part of New Mexico Joined: Aug 19^th, 2012	Re: 44-77 brass wanted Reply #6 - Sep 12^th, 2024 at 9:55pm	Print Post
	TN Longhunter wrote on Sep 11^th, 2024 at 9:36am: No “Cap Obvious “ answer but I call C&H about a set on backorder and they stated they were in the system and waiting for them to get back from heat treat. Said 8-10 weeks, I should have them. Thanks TN Longhunter, when I called them a couple of weeks ago I was told the same. Good luck and post when you get yours.


	IP Logged

rollingblock Senior Forum Member Offline Posts: 386 Location: Texas part of New Mexico Joined: Aug 19^th, 2012	Re: 44-77 brass wanted Reply #7 - Sep 20^th, 2024 at 7:18am	Print Post
	Bump


	IP Logged

rollingblock Senior Forum Member Offline Posts: 386 Location: Texas part of New Mexico Joined: Aug 19^th, 2012	Re: 44-77 brass wanted Reply #8 - Today at 11:23am	Print Post
	BBT


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9979 seconds.