ASSRA Forum - Winchester 1885 LW problem

ASSRA Forum › General › Single Shot Rifles › Winchester 1885 LW problem

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1 2 [3]

Winchester 1885 LW problem (Read 7725 times)

25-20 SS Participating Member Offline Posts: 12 Joined: Nov 29^th, 2023	Re: Winchester 1885 LW problem Reply #30 - Dec 11^th, 2023 at 3:35pm	Print Post
	ssdave wrote on Dec 11^th, 2023 at 3:06pm: I think C Sharps or MVA have those extractors. If you can't find one, I can sell you one, I have several originals. Sweet. I'm very interested in one. It has to be like photo but in .22 so I can fit it to a 25-20 SS rim when I chamber it. I'm Dan at kgowe@comcast.com
	« Last Edit: Dec 11^th, 2023 at 4:27pm by 25-20 SS »

	IP Logged

25-20 SS Participating Member Offline Posts: 12 Joined: Nov 29^th, 2023	Re: Winchester 1885 LW problem Reply #31 - Dec 11^th, 2023 at 4:49pm	Print Post
	Sure shot wrote on Dec 9^th, 2023 at 9:15am: How about having just the chamber sleeved and chamber to .25-20 ss, or have the barrel rebored to .32-20. Sleeve just the chamber, now that's a neat idea. Saves buying a barrel liner or setting the barrel back. Just how is this done? I think I have an idea, but if you have the procedure, I'm interested.


	IP Logged

25-20 SS Participating Member Offline Posts: 12 Joined: Nov 29^th, 2023	Re: Winchester 1885 LW problem Reply #32 - Dec 13^th, 2023 at 5:25pm	Print Post
	I may be reading too much into this but I might just install a barrel liner. This way I won't have to set back the barrel and re-adjust the main spring and forearm attachment points. I just want to make sure that the liner will clean up the barrel breech end, as it is oversize (at .438") which is oversize for the 25-20 SS. It has a rim OD matching close to the .35/.357 +-. I see the liner drill from Brownell's is 7/16" OD (.4375"). The 25-20 Brownells barrel liner OD is .435". I think after drilling and with the epoxy filler it will clean up without any gaps at the breech face. This will keep the barrel at 24" too. Then chamber it for 25-20 SS. Still undecided as it has a good bore. What would you do? (You need to *Login* or *Register* to view media files and links)
	« Last Edit: Dec 13^th, 2023 at 5:54pm by 25-20 SS »

	IP Logged

MrTipUp Frequent Elocutionist Offline Quality is to a product what character is to a man Posts: 1371 Location: Indiana Joined: Feb 19^th, 2020	Re: Winchester 1885 LW problem Reply #33 - Dec 13^th, 2023 at 6:49pm	Print Post
	What would I do? Since the barrel has a "good bore", I'd be inclined to sleeve the chamber. Bill Lawrence


	IP Logged

Cbashooter Frequent Elocutionist Offline Posts: 1604 Location: Eastern Wa. Joined: Mar 31^st, 2018	Re: Winchester 1885 LW problem Reply #34 - Dec 13^th, 2023 at 7:23pm	Print Post
	its about 357 magnum rim. I'd look at 256 mag.my Ruger #1 is pretty accurate in that caliber


	IP Logged

Pages: 1 2 [3]

‹ Previous Topic | Next Topic ›

Page completed in 0.9045 seconds.