ASSRA Forum - Reforming cases the easy way

ASSRA Forum › General › Reloading the Single Shot Rifle › Reforming cases the easy way

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1 [2]

Hot Topic (More than 10 Replies)

Reforming cases the easy way (Read 2055 times)

boats Frequent Elocutionist Offline Posts: 7538 Location: Virginia Joined: Apr 23^rd, 2004	Re: Reforming cases the easy way Reply #15 - Oct 17^th, 2023 at 4:59pm	Print Post
	Actually I have 2 arbor presses. Small one owned many years used for hole punches, rivet setting canvas and leather grommets etc. simple metal bending , lots of cartridge case work too. Ought to sell no easy way to ship it . Cases using lube no real need for a big press. Big one came along hard to resist the 3 1/2 Greenard. If you were In Beaufort NC instead of SC be easy to use it. Boats


	IP Logged

boats Frequent Elocutionist Offline Posts: 7538 Location: Virginia Joined: Apr 23^rd, 2004	Re: Reforming cases the easy way Reply #16 - Oct 17^th, 2023 at 5:06pm	Print Post
	On keeping the force vectors in line. That’s why I fitted my Ram with a removable shoe & mounted chuck, it’s a # 36 Jacobs 3/4 inch capacity. Use a center punch spot & center on the parts pressure point with it then shift to the correct size Ram punch, die etc. Straight is good Boats


	IP Logged

condorsc Full Member Offline NRA Life/Benefactor, ASSRA, SCV Life Posts: 143 Location: Beaufort, S.C. Joined: Nov 13^th, 2021	Re: Reforming cases the easy way Reply #17 - Oct 17^th, 2023 at 10:58pm	Print Post
	Looks like you've got the makings of a serious side hustle. That's a beautiful piece of machinery. Do you know the max pressure it can bring to bear?


	IP Logged

Page Index Toggle

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.6505 seconds.