ASSRA Forum › General › General Discussion › Help with an old project needed
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Help with an old project needed (Read 534 times)
Dino in Reno 2
Junior Member
**
Offline



Posts: 56
Joined: Sep 2nd, 2013
Help with an old project needed
Feb 22nd, 2023 at 8:22pm
Print Post  
I have a mostly complete 1899 Remington-Lee Factory Sporter in 30-40, .30 army. The barrel was keyed for two sights and a scope mount set, and the bore is dark and pitted full length.
The bolt head keeper is missing, but if built from two pieces would not be hard to do.
Sooo... Who would you recommend for a making new barrel that matches the factory profile and the missing retainer? I'm told the barrel threads are the same as on the rolling blocks.
Thanks to all.
  
Back to top
 
IP Logged
 
ssdave
Frequent Elocutionist
*****
Offline



Posts: 1803
Location: Eastern Oregon
Joined: Apr 16th, 2004
Re: Help with an old project needed
Reply #1 - Feb 22nd, 2023 at 9:33pm
Print Post  
I'd ask Curt Hardcastle if he was interested in taking it on.  Curt posts on here as singleshotsam

(You need to Login or Register to view media files and links)

Or John Taylor 

(You need to Login or Register to view media files and links)  He also posts on here.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.0938 seconds.