ASSRA Forum › General › Collecting Single Shot Rifles › Satisfaction, finally....
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) Satisfaction, finally.... (Read 1440 times)
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11512
Location: Why, out West of course
Joined: May 29th, 2006
Satisfaction, finally....
Jan 30th, 2023 at 9:10am
Print Post  
About twenty two years ago I was informed by a noted Ballard collector that the horn tip on my Berg rifle was not original to the piece.  Man that really bugged me.  Angry  Noted collector informed me that Berg rifles never had horn tips on the forestocks. 

Recently I acquired Bill Wests book on Marlin and Ballard rifles. On page 3-12 there is pictured a Berg Ballard rifle with a separate tip on it. Has the correct Berg bead at the action.  Never say never when it comes to old rifles. Specially old custom rifles.   

And here's another one
« Last Edit: Jan 30th, 2023 at 9:27am by westerner »  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
RAM
Participating Member
*
Offline



Posts: 34
Location: Henning, Minnesota
Joined: Sep 27th, 2020
Re: Satisfaction, finally....
Reply #1 - Jan 30th, 2023 at 9:45am
Print Post  
Goes to show a person can never know it all. That horn tip is beautiful! Glad you could put your mind to rest. Smiley
  
Back to top
 
IP Logged
 
rkba2nd
Frequent Elocutionist
*****
Offline



Posts: 1945
Location: earth
Joined: Feb 16th, 2009
Re: Satisfaction, finally....
Reply #2 - Jan 30th, 2023 at 2:44pm
Print Post  
Nifty palm rest to boot!!
  
rkba2nd
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16269
Location: Oregon
Joined: Feb 2nd, 2009
Re: Satisfaction, finally....
Reply #3 - Jan 30th, 2023 at 3:22pm
Print Post  
The forearms, horn tips, and even the checkering patterns look a lot like what came from Marlin factory on deluxe Ballard models. So maybe Berg simply retained the factory forearms when he built new buttstocks for some rifles?
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: Satisfaction, finally....
Reply #4 - Jan 30th, 2023 at 4:51pm
Print Post  
Berg w/o bead.
« Last Edit: Jan 31st, 2023 at 11:16am by Rebel »  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11512
Location: Why, out West of course
Joined: May 29th, 2006
Re: Satisfaction, finally....
Reply #5 - Jan 30th, 2023 at 7:08pm
Print Post  
marlinguy wrote on Jan 30th, 2023 at 3:22pm:
The forearms, horn tips, and even the checkering patterns look a lot like what came from Marlin factory on deluxe Ballard models. So maybe Berg simply retained the factory forearms when he built new buttstocks for some rifles?


So are you thinking they glued the beads on the Ballard forestocks?  Pretty crafty guys back then.  Sure to get knocked off though. The glue they used back then didn't last very long.
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1314
Location: Indiana
Joined: Feb 19th, 2020
Re: Satisfaction, finally....
Reply #6 - Jan 30th, 2023 at 7:18pm
Print Post  
The glue they used back then didn't last very long.

And where did you get that bit of misinformation.  I've worked on many glue-assembled pieces that were made as far back as the 1700s, when hide glue (which is admittedly very water-soluble) was the glue of choice.  Given reasonable care, glue failures in such pieces are very uncommon and are usually limited to veneer "bubbles".

Bill Lawrence
« Last Edit: Jan 31st, 2023 at 11:39pm by MrTipUp »  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11512
Location: Why, out West of course
Joined: May 29th, 2006
Re: Satisfaction, finally....
Reply #7 - Jan 30th, 2023 at 7:32pm
Print Post  
I got that from my experience with hide glue. Replacing hundreds of cue tips in the sixties and the few glue joints I've encountered with old rifles.  Have seen old cabinetry where glue joints dried out and failed. I have always assumed the glue used was hide glue.  Peeling veneer, etc etc.  I remember grandpa sticking with hide glue over the new fangled Elmer's glue. Gramps was a cabinet maker/carpenter. 

Also, gluing a radial strip of wood around a forend would subject it to expansion and contraction which usually makes a glue joint fail.

But I could be full of beans.
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11512
Location: Why, out West of course
Joined: May 29th, 2006
Re: Satisfaction, finally....
Reply #8 - Jan 30th, 2023 at 10:49pm
Print Post  
Got to thinking about it just now. If a block of wood about 3/8 or whatever it takes to make the bead were glued to the end of the forearm.  Yes, that's a possibility. Some Berg Ballard rifles appear to have Ballard forearms for sure.

I did look at my rifle and the bead is part of the forestock. The horn tip lacks the grooves.
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16269
Location: Oregon
Joined: Feb 2nd, 2009
Re: Satisfaction, finally....
Reply #9 - Jan 31st, 2023 at 11:29am
Print Post  
Not sure Joe, but it's possible they removed wood off the rear of the forearm and made the bead from a separate piece if they wanted to save the original forearm. Is your bead of the same wood, or does it look like different wood?

Posted this before I saw your 2nd post Joe.

Ballard  glued on horn tips, and ebony inserts, so I think just about anything could be glued by someone as talented as Berg.
One thing I have noted over the years is palm rests and checkering. Custom stocks usually make sure the checkering isn't covered by the palm rest, where factory forearms with palm rests added often cover checkering when they're added.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11512
Location: Why, out West of course
Joined: May 29th, 2006
Re: Satisfaction, finally....
Reply #10 - Jan 31st, 2023 at 1:35pm
Print Post  
My forend is one piece.
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16269
Location: Oregon
Joined: Feb 2nd, 2009
Re: Satisfaction, finally....
Reply #11 - Jan 31st, 2023 at 8:02pm
Print Post  
westerner wrote on Jan 31st, 2023 at 1:35pm:
My forend is one piece.


Sounds like it's not a factory Ballard forearm.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11512
Location: Why, out West of course
Joined: May 29th, 2006
Re: Satisfaction, finally....
Reply #12 - Jan 31st, 2023 at 9:50pm
Print Post  
No, it's not. But I've always known that.
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1308 seconds.