ASSRA Forum › General › Reloading the Single Shot Rifle › lead/silver alloy?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic lead/silver alloy? (Read 1045 times)
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
lead/silver alloy?
Oct 14th, 2022 at 5:37pm
Print Post  
any thoughts on these guys? 

(You need to Login or Register to view media files and links)
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
Cat_Whisperer
Frequent Elocutionist
*****
Offline


No 1, 9.3x74R

Posts: 3877
Location: Mountains of Virginia
Joined: Apr 17th, 2004
Re: lead/silver alloy?
Reply #1 - Oct 14th, 2022 at 5:57pm
Print Post  
I have a 1-lb roll of "silver bearing solder".
I think it has MAYBE 1% - if that - of silver; the  rest is tin.  There should be an industry spec somewhere.

Silver is sometimes added to the solder to enhance it's conductivity (electrical).
  
Cat Whisperer (trk)
Chief of Smoke
Pulaski Coehorn Works and Skunk Works
Drafted May 1970, Retired Maj. U.S.Army
assra #9885
Back to top
WWW  
IP Logged
 
Grumpy gumpy
Full Member
***
Offline



Posts: 214
Location: australia
Joined: Jul 6th, 2016
Re: lead/silver alloy?
Reply #2 - Oct 14th, 2022 at 6:43pm
Print Post  
And to help with werewolves...... Shocked Shocked


Gumpy
  
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: lead/silver alloy?
Reply #3 - Oct 14th, 2022 at 7:41pm
Print Post  
At one point, I looked into casting silver bullets, ( ala Lone Ranger) but the melting temp of silver is quite high and folks smarter than myself on the forum didn't think I would be successful.
In another life I worked for Carpenter Technologies in the metal lab and did a lot of hardness testing, but it's been so long I've forgotten just how hard Brinell 15 is.
Would that be like 10% tin?
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
Tom_Trevor assra life no.71
Oldtimer
*****
Offline


Tom Trevor

Posts: 692
Location: Granada Hills Ca.
Joined: Jun 16th, 2004
Re: lead/silver alloy?
Reply #4 - Oct 14th, 2022 at 8:52pm
Print Post  
Way to hard an alloy for 32-40. I have seen them in .45 caliber and did not work in any single shot tried in.
  
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: lead/silver alloy?
Reply #5 - Oct 14th, 2022 at 9:16pm
Print Post  
thanks Tom

Aaron
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
gnoahhh
Oldtimer
*****
Offline



Posts: 807
Location: Gaithersburg, MD
Joined: Mar 31st, 2010
Re: lead/silver alloy?
Reply #6 - Oct 14th, 2022 at 9:52pm
Print Post  
I once attempted to cast silver .45 ACP hardball bullets. In the process of trying to get the mold hot enough to cast an unwrinkled bullet, I warped the mold blocks. There went my dreams of getting rich selling "bullet necklaces" to the Goth/vampire slayer crowd.
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1570
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: lead/silver alloy?
Reply #7 - Oct 15th, 2022 at 5:00am
Print Post  
I picked up a pile of that LC 32-40 bullet years ago cheap.they shot great in my 32 Special Ruger #1 I had back then.this was fixed ammo running about 1200.IIRC I was getting just over inch at 100 with a 4x Fecker small game scope.I'd say for fixed ammo hard bullets shoot just fine. In my 50-90 Sharps I currently shoot 15-20 bhn bullets successfully.
« Last Edit: Oct 15th, 2022 at 5:06am by Cbashooter »  
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4020
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: lead/silver alloy?
Reply #8 - Oct 17th, 2022 at 4:03pm
Print Post  
In some long forgotten book or article on buffalo hunting I read that casters would throw a silver dime into each pot of bullet alloy (for whatever reason I don't remember if I ever knew.)  It seems like this is not a new idea, but I've never seen any scientific evidence that it does any good.   Undecided

Froggie
  
Back to top
 
IP Logged
 
Cat_Whisperer
Frequent Elocutionist
*****
Offline


No 1, 9.3x74R

Posts: 3877
Location: Mountains of Virginia
Joined: Apr 17th, 2004
Re: lead/silver alloy?
Reply #9 - Oct 28th, 2022 at 6:06pm
Print Post  
I cast up a bunch of bullets for someone who wanted "silver bullets" - but recognized that wouldn't be possible.  SO, I cast them of pure TIN.  Hard, shiny, and didn't tarnish much over time - that met the desires.
  
Cat Whisperer (trk)
Chief of Smoke
Pulaski Coehorn Works and Skunk Works
Drafted May 1970, Retired Maj. U.S.Army
assra #9885
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8730 seconds.