(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 25-20 SS (Read 664 times)
mr.card1
Participating Member
*
Offline



Posts: 34
Joined: Jun 5th, 2017
25-20 SS
Sep 15th, 2022 at 2:16pm
Print Post  
Looking for load suggestions for my 25-20 Stevens. Breech  seating 120 gn. bullet 10 twist barrel  258 groove Shilen  bullets I have are tapered .259, 260 on the base. Have lots of different powders and primers. Jamison and Betram cases......thanks in advance
  
Back to top
 
IP Logged
 
Saratoga Bill
Participating Member
*
Offline



Posts: 40
Location: Saratoga NY or Crystal River F
Joined: Oct 18th, 2016
Re: 25-20 SS
Reply #1 - Sep 15th, 2022 at 2:46pm
Print Post  
I have had good results with 8.2 grains of 2400, 117 grain breech seated on a highwall with a Douglas barrel.
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Online



Posts: 1572
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: 25-20 SS
Reply #2 - Sep 15th, 2022 at 3:13pm
Print Post  
Saratoga Bill wrote on Sep 15th, 2022 at 2:46pm:
I have had good results with 8.2 grains of 2400, 117 grain breech seated on a highwall with a Douglas barrel.



im right there with Douglas  1-10 and Barnett 118g tapered at 7.5g
  
Back to top
 
IP Logged
 
Aussie_Hunter
Full Member
***
Offline



Posts: 193
Location: Hervey Bay,Queensland
Joined: Jul 7th, 2008
Re: 25-20 SS
Reply #3 - Sep 22nd, 2022 at 1:21am
Print Post  
I use 8.5g AR2205 with 87g lead  projectile for  good results in my  Low wall.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.9667 seconds.