ASSRA Forum - Forming 22 Lovell R2 brass, least sacrilegious?

ASSRA Forum › General › Reloading the Single Shot Rifle › Forming 22 Lovell R2 brass, least sacrilegious?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Forming 22 Lovell R2 brass, least sacrilegious? (Read 575 times)

MSU Marksman Newbie Offline Posts: 6 Joined: Dec 16^th, 2013	Forming 22 Lovell R2 brass, least sacrilegious? Aug 17^th, 2022 at 10:11pm	Print Post
	I managed to score 50 NIB G&H 22-3000 primed brass, and 50 NIB Winchester 25-20 Single Shot brass. Is either one of these options notably more collectable than the other?


	IP Logged

rkba2nd Frequent Elocutionist Offline Posts: 1933 Location: earth Joined: Feb 16^th, 2009	Re: Forming 22 Lovell R2 brass, least sacrilegious? Reply #1 - Aug 17^th, 2022 at 10:45pm	Print Post
	A lot of variables involved. Either can be formed from the other, so one who has a 25-20 SS would be willing to pay more for the correct headstamp, and same for the owner of a 22-3000 classic varmint rifle. Condition of the brass is also a major factor. Even NEW brass may be very brittle, and need to be annealed before use to extend life. Both are difficult to come by, and bring a premium. I would not part with either. If you must decide, flip a coin!!

	rkba2nd
	IP Logged

waterman Frequent Elocutionist Offline Posts: 2833 Location: Behind the Redwood Curtain Joined: Jun 9^th, 2004	Re: Forming 22 Lovell R2 brass, least sacrilegious? Reply #2 - Aug 30^th, 2022 at 12:02pm	Print Post
	On the collectors market, either box will bring at least $50, probably twice that much or more. Depending on age, some of those NPE primers may be corrosive, or may just be dead. Brittle brass that must be annealed is a very reasonable assumption. Annealing before forming is probably necessary. If I had a classic R2 rifle, I'd want the undisturbed boxes as nostalgia, just to go with the rifle. There must be some Jamison brass available somewhere.


	IP Logged

Marlene Senior Forum Member Offline Posts: 272 Joined: Oct 30^th, 2015	Re: Forming 22 Lovell R2 brass, least sacrilegious? Reply #3 - Sep 5^th, 2022 at 11:01pm	Print Post
	FYI Jamison brass will require lower max loads than what you find in old books as well as probably need necks turned for a 2R chamber (both because of thicker brass).


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.1890 seconds.