ASSRA Forum - uberli low wall .22lr question

ASSRA Forum › General › Single Shot Rifles › uberli low wall .22lr question

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

uberli low wall .22lr question (Read 1057 times)

rap2233 Participating Member Offline Posts: 13 Location: Ma. Joined: May 11^th, 2020	uberli low wall .22lr question Aug 6^th, 2022 at 6:33pm	Print Post
	Does anyone have any experience with one . I was thinking of using for off hand 50 or 100 yard .


	IP Logged

texasmac Frequent Elocutionist Offline Posts: 1985 Location: Central Texas Joined: Aug 16^th, 2004	Re: uberli low wall .22lr question Reply #1 - Aug 6^th, 2022 at 6:46pm	Print Post
	rap2233 wrote on Aug 6^th, 2022 at 6:33pm: Does anyone have any experience with one . I was thinking of using for off hand 50 or 100 yard . A shooting friend of mine has one he's used for .22 silhouette & has done quite well out to 200yds. I shortened the barrel from 30" to 22" to make it handle better for off-hand shooting & fired several test groups. Boy does it like CCI Target. Shot 2 groups of 5 shots. One measures 3/8” & the other 1/2” & both can be completely covered with a penny. Also tried Eley Match (black box), also two 5-shot groups. One was 3/4” & the other 7/8”. So at least at 50 meters it clearly prefers CCI Target. He later shot it with several brands of target ammo at 100yds, resulting in the following: Average 10-shot groups at 100 yards are as follows: Eley Match - 1” Wolf - 1.7” Midas plus 1.5” Fed Match - 1.6” Lapua Polar Biathalon - 1.25” RWS 100 - 1.75” Fed Hi-Vel Match - 2.4” SK Long Range - 1.5” Fed GM Match - 1.8” Fed GM Targer - 1.6” RWS 100 - 1.75” Wayne


	IP Logged

Hiwall55 Senior Forum Member Offline Posts: 468 Location: west central Illinois Joined: Jun 30^th, 2012	Re: uberli low wall .22lr question Reply #2 - Aug 8^th, 2022 at 8:24pm	Print Post
	I bought one a long time ago, wouldn't shoot work a crap, bought another barrel ,then decided to shorten the factory barrel to 24 inches, world of difference, sent it to lee Shaver and had a single set trigger installed, sweet gun and will win matches.


	IP Logged

texasmac Frequent Elocutionist Offline Posts: 1985 Location: Central Texas Joined: Aug 16^th, 2004	Re: uberli low wall .22lr question Reply #3 - Aug 8^th, 2022 at 8:41pm	Print Post
	BTW, the rifle with all the shooting results has a factory double-set trigger. Wayne


	IP Logged

P08 Participating Member Offline Posts: 18 Joined: Nov 26^th, 2020	Re: uberli low wall .22lr question Reply #4 - Aug 24^th, 2022 at 9:53pm	Print Post
	I have a standard single trigger low wall that I did some action work on to lighten the trigger pull weight. I shoot silhouettes with it @ 200 yards and hit 8 out of 10 most times depending on the wind. The nice thing is mine loves cheap Agula ammo. I will die with this gun! I had a deluxe double set trigger model with a repro Malcom scope on it. Just wasn't the same, felt heavy to me. Sold it off a few years ago, went out west.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9293 seconds.